ZVIZZER polishing pack polishes and pads HC4000 FC2000

ZVIZZER needs no introduction in the world of polishing and its equipment. Pads and polishes are of excellent quality.

In this pack, you will find the two best-sellers from the brand: HC4000 for heavy correction with the associated pink pad. FC2000 for finishing with the yellow pad. This product/accessory duo will ensure excellent correction and finishing quality in all circumstances. Furthermore, the Trapez technology of the pads featured in this pack allows safe use with an orbital machine.



ZVIZZER HC 4000:

ZVIZZER Heavy Cut Scratch Remover (HC4000) is a hard polish (Compound) for correcting significant to major defects on a clear coat (medium and deep scratches, polishing mark removal).

Its correction grit is very high and the concentration of aluminum oxide (abrasive power) is well above that of other compounds generally encountered. Heavy Cut Scratch Remover (HC4000) will thus be capable of working from P1500 grit.

Nevertheless, the finish left by this polish is not to be overlooked. For such an abrasive compound, you can expect a very fine finish requiring little to no follow-up work if you work Heavy Cut Scratch Remover (HC4000) for a good amount of time.


Like all water-based polishes in the ZVIZZER range, Heavy Cut Scratch Remover (HC4000) will produce very little dust, can be worked for a long time while remaining sufficiently liquid to avoid drying out too quickly. A real advantage for the detailer looking to optimize their correction quality and working conditions.

Although initially designed to be used with the pink pad, following the characteristic ZVIZZER color code, you can nevertheless use Heavy Cut Scratch Remover (HC4000) with all pad colors in the range, as well as with the excellent Doodle Pad wool pad or even the microfiber or hybrid pads in the range. The ZVIZZERThermo Trapez or Thermo Allrounder pad models will be perfectly suited.

The great advantage of this polish is its cutting power combined with the level of finish it leaves, as well as its versatility with the choice of pads available to you: foam, wool, microfiber, hybrid.

In our opinion, it is the "Swiss army knife" of the ZVIZZER range and a formidable weapon for correcting deep defects, including on hard clear coats.

You should therefore make sure to perfectly degrease your surfaces with an alcohol-based solution (e.g.: Clean Top) before applying a ceramic coating.



ZVIZZER FC 2000:

ZVIZZER Fine Cut Hologram Remover (FC2000) is a finishing polish that corrects very fine defects on your clear coats while ensuring a very high-gloss finish with a beautiful wet-look effect, particularly on warm color tones. The perfect polish for removing holograms, dull and milky hazing caused by heavier polishing steps.

With a water-based formula, this polish will produce very little dust during use and can be worked for a very long time until the break point.

After a heavy correction phase with HeavyCut Deep Scratch Remover (HC4000) you can move directly to Fine Cut Hologram Remover (FC2000), so impressive is its ability to correct defects for a finishing polish.

Although initially designed to be used with the yellow pad, following the characteristic ZVIZZER color code, you can nevertheless use ZVIZZER Fine Cut Hologram Remover (FC2000) with an orange pad, for example, to retain a little more cut. The ZVIZZER Thermo Trapez or Thermo Allrounder pad models will be perfectly suited.

The oils contained in this polish will ensure a very oily, smooth finish on your vehicle. Wiping off ZVIZZER Fine Cut Hologram Remover (FC2000) is also quite easy, not too greasy under the microfiber.

You should therefore make sure to perfectly degrease your surfaces with an alcohol-based solution (e.g.: Clean Top) before applying a ceramic coating.



Thermo Trapez Hard Pad Red:

The Thermo Trapez Hard Pad Red from ZviZZer stands out for its exceptional build quality, designed for intensive correction work, including on the hardest clear coats. ZviZZer is a world reference for the robustness and performance of its polishing foams, and this pad is no exception.

The build quality is evident in the strength of the Velcro attachment, with very strong adhesive between the foam and the interface. The trapezoidal cut is also perfectly tailored and chamfered for greater durability. The open-cell, aerated foam structure also ensures perfect heat distribution. The central hole in the pad also allows excess heat to be dissipated during use.

Unlike the other foam pad families from the brand ZviZZer (AllRounders), this Trapez version does not feature the additional rubber interface between the Velcro and the foam.

The Thermo foam used is specially formulated to resist deformation under pressure without softening, ensuring consistent performance throughout the correction process. This exclusive ZviZZer technology significantly increases the durability of the pad, up to three to four times greater than that of a conventional foam.

ZviZZer has established an exclusive color code to identify the optimal combinations between pad, polish, and microfiber. The Thermo Trapez Hard Pad Red pairs ideally with the polish ZviZZer Heavy Cut Scratch Remover (HC 4000) or any other compound for heavy corrections.

With its very dense foam, this pad is designed to withstand high pressure and correct marked defects, even on the most challenging surfaces, such as German clear coats renowned for their hardness.

The Thermo Trapez Hard Pad Rouge is durable and designed exclusively for use with orbital polishers, ensuring effective correction and an impeccable finish.

Thermo Trapez Soft Yellow:

The Thermo Trapez Soft Yellow pad is a pad of exceptional build quality, dedicated to finishing work. ZviZZer needs no introduction when it comes to the quality and robustness of their polishing foams. A current world reference.

The build quality is evident in the strength of the Velcro attachment, with very strong adhesive between the foam and the interface. The trapezoidal cut is also perfectly tailored and chamfered for greater durability. The open-cell, aerated foam structure also ensures perfect heat distribution. The central hole in the pad also allows excess heat to be dissipated during use.

Unlike the other foam pad families from the brand ZviZZer (AllRounders), this Trapez version does not feature the additional rubber interface between the Velcro and the foam.

The Thermo foam used in this pad is very special and allows it to resist deformation under pressure while preventing the pad from softening and losing performance entirely. This Thermo foam, which equips all ZviZZer foam pads, significantly improves performance and pad durability (up to 3 to 4 times greater compared to a similar pad in traditional foam).

ZviZZer features a registered and protected color code for their pad range, very specific, to perfectly identify which polish should be used with which pad and also potentially with which drying microfiber. Thus, Thermo Trapez Soft Yellow can be used with the polish ZviZZer Fine Cut Hologram Remover (FC 2000) or any other finishing polish from another brand.

The fineness of the foam in this finishing pad will ensure an impeccable finish, even on the most delicate and difficult colors to work with (direct gloss, solid finish, etc.). It will be the perfect pad to use after a pass with a Pink or Orange ZviZZer pad, for example, with their associated polishes.


A pad of very high quality, durable and versatile since it can be used with an orbital or rotary-orbital machine, ensuring a perfect finish in all circumstances.

** Zvizzer - German Innovation at the Service of Automotive Polishing **

ZviZZer is a German brand specializing in automotive polishing, recognized for its expertise and innovation. It offers a complete range of foam, wool, and microfiber pads, as well as next-generation water-based polishes, guaranteeing dust-free and odor-free use. Zvizzer brings disruptive innovation to Detailing: THERMO foams, which do not deform with heat during polishing, allowing you to work your polish much longer without damaging your pad.