ZVIZZER Nano Fury Polisher Pack

This polishing kit includes the battery-powered nano polisher from FALKO TOOLS for easy polishing of details and hard-to-reach areas. The kit also includes excellent Thermo pads (Hard and Soft) and ZVIZZER polishes (HC 4000 and FC 2000) to help you correct your vehicle's paintwork effectively.



FALKO TOOLS Nano Polisher:

This battery-powered nano polisher with pure orbital action was developed by the detailing equipment brand FALKO TOOLS to make very hard-to-reach areas much more accessible to detailers. Areas previously considered workable only by hand can now be machine-polished, saving time and improving effectiveness.

In this thoughtfully designed case, you get 2 batteries rated at 2.5Ah so you can have one available while the other charges, plus an AC charger with an LED charge indicator. 
The kit's biggest advantage is its 3 backing plates for working in areas of different widths. The backing plate sizes range from 1,2' to 3', with a 2' plate as well. They attach by screwing them on using the supplied tool (an open-end wrench for removing either the backing plate or the orbital drive unit).

In addition to these useful backing plates, you get an extension shaft for reaching deep, often otherwise inaccessible areas, particularly air intakes. This extension also screws directly onto the polisher body. Note that you must unscrew the orbital drive unit before fitting the extension. Never use the extension on the silver orbital drive unit!

The set also includes a second orbital drive unit (6mm) in addition to the one fitted to the machine as standard (12mm), allowing you to vary the orbit. There is also one last useful accessory: an adjustable mini chuck for small accessories such as mini polishing cones or anything else that needs to be held in a chuck. Practical and well thought out! Again, note that this mini chuck must be fitted directly to the polisher after you have first unscrewed the orbital drive unit.

The case supplied by FALKO TOOLS provides excellent storage: every accessory has its place and stays put. There is also an internal storage mesh pocket for your pads and microfiber towels.

This battery-powered nano polisher offers good runtime even at full speed (adjustable on the machine's handle with a 1-to-6 speed control). Its 2000-5500 rpm speed range provides a start that is neither too slow nor too fast, while the maximum speed enables effective defect correction.

If you have been looking for a compact polisher, ideally battery-powered, to make your work more efficient, this nano polisher from FALKO TOOLS should fit the bill. Once you try it, you will not want to be without it!


Technical specifications:

- Power: ~200W
- Speed: 2000-5500 rpm
- 2 orbital drive units (6mm and 12mm)
- 2 batteries rated at 2.5Ah
- 230V wired charger.
- Supplied backing plate sizes: 1,2', 2', 3'.
- Rotary extension shaft
- Mini chuck



HC 4000 Heavy Cut Polish:

ZviZZer Heavy Cut Scratch Remover (HC4000) is a heavy-cut compound for correcting significant to severe clear-coat defects (moderate to deep scratches and defects left after wet sanding).

It has substantial cutting power and a much higher concentration of aluminum oxide abrasives than compounds commonly available. Heavy Cut Scratch Remover (HC4000) can therefore remove P1500-grit sanding marks.
Despite this, it also leaves an excellent finish. For such an abrasive compound, you can expect a very good finish requiring little or no further polishing if you work Heavy Cut Scratch Remover (HC4000) long enough.
Like all water-based polishes in the ZviZZer range, Heavy Cut Scratch Remover (HC4000) produces very little dust and offers a long working time while remaining fluid enough not to dry too quickly. This is a real advantage for detailers looking to improve both correction quality and working conditions.

Although originally intended for use with the pink pad, in keeping with ZviZZer's distinctive color code, you can use Heavy Cut Scratch Remover (HC4000) with any pad color in the range, as well as the excellent Doodle Pad wool pad or the range's microfiber and hybrid pads. The ZviZZer Thermo Trapez and Thermo Allrounder pad models are both well suited to it.

A major advantage of this polish is its cutting power combined with the finish it leaves, as well as its versatility: you can pair it with foam, wool, microfiber or hybrid pads. 

In our view, it is the "Swiss Army knife" of the ZviZZer range and a formidable choice for correcting deep defects, including on hard clear coats. Be sure to thoroughly degrease the surfaces with an alcohol-based solution (e.g., Clean Top) before moving on to your finishing pass.


FC 2000 Fine Cut Polish:

ZviZZer Fine Cut Hologram Remover (FC2000) is a finishing polish that corrects very fine defects in your clear coat while delivering a high-gloss finish with an attractive wet look, especially on warmer paint colors. It is ideal for removing holograms and dull, milky haze left by more aggressive polishing.

This water-based polish produces very little dust during use and offers a long working time before it breaks down.

After a heavy correction stage with HeavyCut Deep Scratch Remover (HC4000) you can move straight to Fine Cut Hologram Remover (FC2000) thanks to its impressive defect-correction ability for a finishing polish.

Although originally intended for use with the yellow pad, in keeping with ZviZZer's distinctive color code, you can also use ZviZZer Fine Cut Hologram Remover (FC2000) with an orange pad, for example, to retain a little more cut. The ZviZZer Thermo Trapez and Thermo Allrounder pad models are both well suited to it.

The oils in this polish give your vehicle a rich, smooth finish. ZviZZer Fine Cut Hologram Remover (FC2000) is also fairly easy to wipe off without feeling too greasy under the microfiber towel.

Be sure to thoroughly degrease the surfaces with an alcohol-based solution (e.g., Clean Top) before applying a ceramic coating.


Thermo Allrounder Hard Pad Red:

The Thermo Allrounder Hard Pad Red is an exceptionally well-made pad designed for heavy correction, including on hard clear coats. ZviZZer is well known for the quality and durability of its polishing foams. It is a leading name worldwide.

The build quality is evident in the strong hook-and-loop backing and the highly durable bond between the foam and the interface layer. The trapezoidal profile is precisely cut and beveled for greater durability, while the integrated interface layer provides more control during polishing. The open-cell, ventilated foam structure also distributes heat evenly. The pad's center hole helps dissipate excess heat during use.

The interface layer between the foam and the hook-and-loop backing provides even greater stability than other ZviZZer Trapez pads. This is a notable advantage when you want to maintain control of the pad on flat surfaces.

The Thermo foam used in this pad is specially designed to resist deformation under pressure while preventing the pad from softening and losing performance. This Thermo foam, used in all ZviZZer foam pads, considerably improves performance and pad durability (up to 3 to 4 times that of a comparable pad made with conventional foam).

ZviZZer uses a distinctive, registered and protected color code for its pad range, making it easy to identify which polish to use with each pad and, potentially, which microfiber towel to use for wipe-off. The Thermo Allrounder Hard Pad Pink can therefore be used with ZviZZer Heavy Cut Scratch Remover (HC 4000) or any other heavy-cut compound.

The highly dense foam can withstand substantial pressure and correct severe defects, including on challenging paint colors or German clear coats known for their hardness.

A high-quality, durable and versatile pad that can be used with a dual-action or rotary polisher to deliver an excellent finish in all circumstances.


Thermo Allrounder Soft Pad Yellow:

The Thermo Allrounder Soft Yellow pad is exceptionally well made and designed for finishing work. ZviZZer is well known for the quality and durability of its polishing foams. It is a leading name worldwide.

The build quality is evident in the strong hook-and-loop backing and the highly durable bond between the foam and the interface layer. The trapezoidal profile is precisely cut and beveled for greater durability. The open-cell, ventilated foam structure also distributes heat evenly. The pad's center hole helps dissipate excess heat during use.

The interface layer between the foam and the hook-and-loop backing provides even greater stability than other ZviZZer Trapez pads. This is a notable advantage when you want to maintain control of the pad on flat surfaces.

The Thermo foam used in this pad is specially designed to resist deformation under pressure while preventing the pad from softening and losing performance. This Thermo foam, used in all ZviZZer foam pads, considerably improves performance and pad durability (up to 3 to 4 times that of a comparable pad made with conventional foam).

ZviZZer uses a distinctive, registered and protected color code for its pad range, making it easy to identify which polish to use with each pad and, potentially, which microfiber towel to use for wipe-off. The Thermo Allrounder Soft Yellow pad can therefore be used with ZviZZer Fine Cut Hologram Remover (FC 2000) or any other brand's finishing polish.

The fine foam of this finishing pad delivers an impeccable finish, even on the most delicate and challenging paint colors and finishes (single-stage paint, solid colors, etc.). It is the ideal pad to use after a ZviZZer Pink or Orange pad with its corresponding polish, for example.

A high-quality, durable and versatile pad that can be used with a dual-action or rotary polisher to deliver an excellent finish in all circumstances.

Falko Tools, whose tagline is "Detailing starts here", is a premium detailing accessories brand whose products are designed — particularly in terms of manufacturing quality — for detailing professionals.