One Polish Zvizzer - ZV015WP
ZviZZer One Polish | All-in-One Polish
ZviZZer One Polish | All-in-One Polish
ZviZZer One Polish | All-in-One Polish
One Polish - Zvizzer
ZviZZer One Polish | All-in-One Polish
ZviZZer One Polish | All-in-One Polish
ZviZZer One Polish | All-in-One Polish
Zvizzer
ZV015WP-1

One Polish

All-in-one polish offering correction, finish, and protection in a single polish.

  • Size: 250 ml or 750ml.
  • Excellent correction for an All in One
  • Superb finish.
  • Protection lasting several months (6 to 12 months depending on vehicle use).

 

€26.83

(€99.25 Par litre)

You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 7 points loyalty. Your cart total will be 7 points equivalent to a discount voucher of €1.40
Description

ZviZZer One is a polish that stands somewhat apart from the traditional All In One (AIO) products we know. Indeed, its correction capacity is truly excellent, similar to the HC4000 Heavy Cut and will deliver impressive before/after results. It is capable of recovering from wet sanding with P2000 grit!

Furthermore, the finish achieved is more than excellent, as you will get the same level of gloss and wet look as with the FC 2000 Fine Cut thanks to the addition of oils to the polish.

Finally, you will benefit from a synthetic protection lasting between 6 to 12 months depending on use and storage conditions of your vehicle.

No AIO on the market can claim such a combination of correction/finish/protection!

ZviZZer One is also very versatile in terms of pad usage. You can use it with all pad colors in the ZviZZer range, both foam pads (Thermo Trapez or Thermo All Rounder) and microfiber pads.

The colors of ZviZZer One are not random. Pink for its cutting power comparable to the HC4000 Heavy Cut, yellow for the finish and the oils of the FC 2000 Fine Cut, and green for the synthetic protection provided, comparable to that of the UC 1000 Ultra Fine Cut.

ZviZZer One continues to impress with its versatility, as you can use it on all types of high-gloss paints and finishes, with an orbital or rotary polisher.

This exceptional polish produces very little dust during use.

However, you will notice that product consumption is slightly higher than with a standard AIO, due to the stronger abrasives contained in its formula. It contains some fillers, which mask the last remaining defects.

Available in 250ml and 750ml.

Learn more about Zvizzer

** Zvizzer - German Innovation at the Service of Automotive Polishing **

ZviZZer is a German brand specializing in automotive polishing, recognized for its expertise and innovation. It offers a complete range of foam, wool, and microfiber pads, as well as next-generation water-based polishes, guaranteeing dust-free and odor-free use. Zvizzer brings disruptive innovation to Detailing: THERMO foams, which do not deform with heat during polishing, allowing you to work your polish much longer without damaging your pad.

To be used with
Instructions for use

How do you use ZviZZer One ?

  1. Shake the bottle well before use.
  2. Choose the pad to use with ZviZZer One (Thermo Trapez or Allrounder).
  3. Spread in a peripheral circle on your pad.
  4. Start by spreading your polish at low speed (2 on a dual-action polisher, 900/1000rpm on a rotary). Then increase to speed 4-5 on a dual-action polisher and 1500rpm on a rotary.
  5. Work on a 60x60cm section using straight-line motions and cross-hatch passes.
  6. ZviZZer One has a shorter working time than a conventional AIO, so 2 cross-hatch passes will generally be sufficient.
  7. Wipe with a ZviZZer microfiber towel in the color of your choice.

Tip: Be sure to work ZviZZer One thoroughly on a prepared surface (chemical and mechanical decontamination). Work only in the shade and on cool surfaces.

Specifications

CORRECTION/FINISHING/PROTECTION

All 3 in one product, with genuine correction!

PAD SELECTION

Can be used with all foam and fiber/wool pads in the range.

LOW DUST

Produces very little dust while working.

TIME SAVING

3 steps in one product, fast and effective!

Product sheet
Use with orbital machine
Yes
Use with roto-orbital machine
Yes
Use with rotary machine
Yes
Cut Level
7/10
Finish level
9/10
Integrated synthetic protection
Yes
Dust creation
Few
Usage precautions
Hazard statement

This mixture is not classified as hazardous under Regulation (EC) No 1272/2008.

Contains

Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics

Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products
Pro tips to guide you