Zvizzer
ZV003TMR-1
THERMO MINI Hard Cut Foam Pad
Correction mini pad from the German brand ZviZZer, for correcting significant defects on clear coats.
- Available sizes: 15/25mm.
- Thermo Foam.
- Very resistant hook-and-loop backing
- For use with a Dremel or Autotriz Nano Polisher system.
€1.43
(€1.43 L'unité)
In stock
- shipped within 24h/72h
Pay in 3 installments with
from €100 of purchase.
By purchasing this product you can earn up to 1 points loyalty.
Your cart total will be
1 points equivalent to a discount voucher of €0.20
from €100 of purchase.
Description
The THERMO MINI Hard Cut Foam Pad Red is a mini pad of exceptional craftsmanship, dedicated to heavy correction work on significant defects.
ZviZZer needs no introduction when it comes to the quality and durability of their polishing foams. A current world reference.
The quality of craftsmanship is felt through the strength of the hook-and-loop backing on one hand, with a very resistant adhesive between the foam and the backing. The honeycomb and aerated foam structure (known as open-cell) also ensures perfect heat distribution.
This mini pad is designed for use with a micro-machine such as a Dremel with a mini backing plate or the Autotriz Nano Polisher 3.0.
Once equipped with this THERMO MINI Hard Cut Foam Pad, your working tool will allow you to access the most hard-to-reach areas such as the insides of logos, lettering, wheel spokes, etc.
The Thermo foam used in this mini pad is very special and allows it to resist deformation under pressure, while preventing the pad from softening and completely losing performance. This Thermo foam equipping all ZviZZer foam pads considerably improves performance and pad durability (up to 3 to 4 times greater compared to another similar pad in traditional foam).
ZviZZer uses a registered and protected color code for their pad range, very specific, to perfectly identify which polish should be used with which pad and also potentially with which wiping microfiber. Thus, this THERMO MINI Hard Cut Foam Pad Red can be used with the ZviZZer Hard Cut (HC4000) polish or any other correction or intensive polish from another brand.
The very rigid foam of this pad will ensure very heavy correction with a very decent finish even on the most delicate and difficult colors to work with (direct gloss, solid finish, etc.). A pure finishing pass with a Yellow or Green pad from the brand will be required for a perfect finish.
A pad of very high quality, durable and versatile, ensuring excellent cutting power in all circumstances.
Available in sizes:
- 15mm (thickness: 10mm)
- 25mm (thickness: 10mm)
Available individually or in packs.
Main features of the THERMO Hard Cut Foam Pad:
- Abrasiveness: Hard.
- Thermo Foam
- Color: Pink
- Thickness: 10mm
- Very resistant hook-and-loop backing.
Learn more about Zvizzer
** Zvizzer - German Innovation at the Service of Automotive Polishing **
ZviZZer is a German brand specializing in automotive polishing, recognized for its expertise and innovation. It offers a complete range of foam, wool, and microfiber pads, as well as next-generation water-based polishes, guaranteeing dust-free and odor-free use. Zvizzer brings disruptive innovation to Detailing: THERMO foams, which do not deform with heat during polishing, allowing you to work your polish much longer without damaging your pad.
To be used with
Instructions for use
How do you use the THERMO MINI Hard Cut Foam Pad?
- Choose the mini pad size according to your backing plate size (e.g., a 25mm ZviZZer size is suitable for a 25mm or smaller machine backing plate).
- Center your mini pad on your backing plate.
- Apply a small amount of polish (e.g., Hard Cut HC 4000) directly onto the pad.
- Spread your polish quickly at low speed over a small area.
- Then work the polish at high speed (1500 rpm). Be careful not to apply pressure on sharp, protruding edges.
- Finish your work when the residual polish haze is very thin, almost transparent.
- Wipe off your polish with a suitable microfiber towel (e.g., Microfibre Cloth Red) using a pad of Clean Top (alcohol-based).
- Inspect your finish, then apply a protective wax.
Tip: Remember to clean your pad regularly with ZviZZer Pad Cleaner cleaning solution to keep your foam completely free of polish dust. Your work and results will be much better. Spray Pad Cleaner directly onto the pad, massage the pad between your fingers, then wipe everything with a microfiber towel or place the pad in a Pad Washer.
Specifications
MANUFACTURING QUALITY
One of the best pad finishes currently on the market. Highly durable hook-and-loop backing.
THERMO FOAM
Special foam resistant to deformation and heat buildup.
ACCESSIBILITY
This mini pad provides full access to tight areas.
AVAILABLE IN MULTIPLE SIZES AND PACKS
2 sizes available and great-value packs.
Care instructions
- Always clean your pad thoroughly and regularly with Pad Cleaner
- Never leave an object or tool resting on the pad.
- Never clean a pad in a washing machine.
- Always pull gently on the hook-and-loop backing to remove the pad from the backing plate.
Product sheet
Color
Pink
PAD material
Foam
PAD Technology
Thermo
Foam density COLD (kPa)
20
HOT foam density (kPa)
17
Cells (1-cm-line)
20/22
Use with Dremel
Yes
Use with the Autotriz Nano Polisher
Yes
Our customers' reviews of this product
Frequently questions
FAQ
Be the first to ask a question about this product!
Question about the product
You may also like
Recently viewed products