Zvizzer
ZV006TMG-1
THERMO MINI Ultra Soft Cut Foam Pad
Mini finishing pad from the German brand ZviZZer, for correcting the finest defects and holograms with a perfect finish.
- Available sizes: 15/25mm.
- Thermo foam.
- Very durable Velcro backing
- For use with a Dremel or Autotriz Nano Polisher system.
€1.43
(€1.43 L'unité)
In stock
- shipped within 24h/72h
Pay in 3 installments with
from €100 of purchase.
By purchasing this product you can earn up to 1 points loyalty.
Your cart total will be
1 points equivalent to a discount voucher of €0.20
from €100 of purchase.
Description
The THERMO MINI Ultra Soft Cut Foam Pad Green is a mini pad of exceptional craftsmanship, dedicated to pure finishing work or the application of waxes and polishes. ZviZZer needs no introduction when it comes to the quality and durability of their polishing foams. A current world reference.
The build quality is felt through the strength of the Velcro backing on one hand, with a very strong adhesive between the foam and the Velcro. The open-cell foam structure also ensures a perfect distribution of heat.
This mini pad is dedicated to use with a micro-machine such as a Dremel with a mini backing plate or the Autotriz Nano Polisher 3.0.
Once equipped with this THERMO MINI Ultra Soft Cut Foam Pad, your tool will allow you to reach the most difficult areas such as the insides of logos, lettering, wheel spokes, etc.
The Thermo foam used in this mini pad is very special and allows it to resist deformation under pressure, while preventing the pad from softening and losing all performance. This Thermo foam fitted on all ZviZZer foam pads offers considerably improved performance and pad durability (up to 3 to 4 times greater compared to a similar pad with traditional foam).
ZviZZer uses a registered and protected color code for their pad range, very specific, to perfectly identify which polish should be used with which pad and also potentially with which wiping microfiber. Thus, this THERMO MINI Ultra Soft Cut Foam Pad Green can be used with ZviZZer Ultrafine Cut Swirl Hologram Remover & Sealing (UC 1000) or any other finishing polish from another brand.
The fineness of the foam in this ultra-finishing pad will ensure a perfect finish even on the most delicate and difficult paint types to work with (direct gloss, solid finish, etc.). Ideal for ultra-finishing work after a heavy cutting stage.
You can also use this pad to apply your liquid waxes or your favorite glaze.
A very high-quality pad with excellent Velcro durability, ensuring a perfect finish in all circumstances.
Available in sizes:
- 15mm (thickness: 10mm)
- 25mm (thickness: 10mm)
Available individually or in packs.
Main features of the ZviZZer Trapez Ultra Soft Pad Green:
- Abrasiveness: Ultra fine.
- Thermo foam
- Color: Green
- Thickness: 10mm
- Very durable Velcro backing.
Learn more about Zvizzer
** Zvizzer - German Innovation at the Service of Automotive Polishing **
ZviZZer is a German brand specializing in automotive polishing, recognized for its expertise and innovation. It offers a complete range of foam, wool, and microfiber pads, as well as next-generation water-based polishes, guaranteeing dust-free and odor-free use. Zvizzer brings disruptive innovation to Detailing: THERMO foams, which do not deform with heat during polishing, allowing you to work your polish much longer without damaging your pad.
To be used with
Instructions for use
How to use the THERMO MINI Ultra Soft Cut Foam Pad?
- Carefully select the mini pad size based on your backing plate size (e.g.: A 25mm ZviZZer size will fit a 25mm or smaller machine backing plate).
- Center your mini pad on your backing plate.
- Apply a small drop of polish (e.g.: Ultrafine Cut Swirl Hologram Remover & Sealing UC 1000) directly onto the pad.
- Spread your polish quickly at low speed over a small working area.
- Then work your polish at low speed (900 rpm). Take care not to apply excessive pressure on sharp edges and body lines.
- Finish your work when the residual polish haze is very thin, almost clear.
- Wipe off your polish with a suitable microfiber towel (e.g.: Microfibre Cloth Green) using a wipe-down spray like Clean Top (alcohol-based)
- Check your finish and then apply a protective wax.
Pro Tip: Remember to clean your pad regularly with ZviZZer Pad Cleaner solution to keep your foam completely free of spent polish and residue. Your work and results will be much better. Spray Pad Cleaner directly onto the pad, massage the pad between your fingers, and then wipe clean with a microfiber towel or run the pad through a Pad Washer.
Specifications
BUILD QUALITY
One of the best pad finishes currently on the market. Highly durable hook-and-loop backing.
THERMO FOAM
Specialized foam resistant to deformation and temperature increases.
ACCESSIBILITY
This mini pad provides complete access to tight areas.
AVAILABLE IN MULTIPLE SIZES AND PACKS
2 sizes available and cost-effective multi-packs.
Care instructions
- Always clean your pad regularly with Pad Cleaner
- Never leave an object or tool resting on the pad.
- Never clean a pad in a washing machine.
- Always pull gently on the hook-and-loop backing to remove the pad from the backing plate.
Product sheet
Color
Light green
PAD material
Foam
PAD Technology
Thermo
Foam density COLD (kPa)
5
HOT foam density (kPa)
4
Cells (1-cm-line)
22/24
Use with Dremel
Yes
Use with the Autotriz Nano Polisher
Yes
Our customers' reviews of this product
Frequently questions
FAQ
Be the first to ask a question about this product!
Question about the product
You may also like
Recently viewed products