HR 6000 HOLOGRAM REMOVER Zvizzer - ZV018HR
Zvizzer
ZV018HR

HR 6000 HOLOGRAM REMOVER

Professional ultra-finishing polish by ZviZZer, for the fast and effective removal of remaining holograms.

  • Volume: 750ml.
  • Exemplary finish
  • All types of varnishes/paints
  • Dust-free.
€63.44
You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 6 points loyalty. Your cart total will be 6 points equivalent to a discount voucher of €1.20
Description

ZviZZer HR 6000 Hologram Remover (HR 6000) is an ultra-finishing polish in the professional range with incredible shine. This polish will allow you to achieve a level of finish rarely reached with other competing professional polishes, regardless of the fragility of the paint you are working on. High-gloss paints will hold no more secrets for you. Say goodbye to "hazing" and other milky haze or holograms.

This professional-range polish was developed by Zvizzer to offer rapid achievement of a perfect finish in minimum time.

As is generally the case with finishing polishes, HR 6000 Hologram Remover will produce very little dust during use. A great advantage for easier wiping and to avoid contaminating your work environment.

HR 6000 Hologram Remover contains no fillers or silicone.

This exceptional polish will be the direct complement to a hard polishing step with Hard Cut (HC1500) from the same professional range or any other competing compound.

Perfectly usable with the black Thermo Pad Black from the ZviZZer professional range with its characteristic color code, you can also use it with the yellow pad to retain a bit more cut on your pass.

Please note that you will need to degrease your surface thoroughly afterwards (e.g. Clean Top) before applying a full ceramic coating.


Available in 750ml.

Learn more about Zvizzer

** Zvizzer - German Innovation at the Service of Automotive Polishing **

ZviZZer is a German brand specializing in automotive polishing, recognized for its expertise and innovation. It offers a complete range of foam, wool, and microfiber pads, as well as next-generation water-based polishes, guaranteeing dust-free and odor-free use. Zvizzer brings disruptive innovation to Detailing: THERMO foams, which do not deform with heat during polishing, allowing you to work your polish much longer without damaging your pad.

To be used with
Instructions for use

How to use ZviZZer Hologram Remover (HR6000)?

  1. Shake the bottle well before use.
  2. Select your pad to use with ZviZZer Hologram Remover HR6000 (Thermo Pad Black preferred)
  3. Spread a walnut-sized drop of polish directly onto the surface.
  4. Start by spreading the polish at low speed (speed 2 on a dual action polisher), then increase to speed 4.
  5. Work on a 60x60 cm section using straight, overlapping cross-hatch passes.
  6. Buff off with a microfiber towel like Cocktail Microfibers Black Velvet for a flawless finish.

Tip: Make sure to work ZviZZer Hologram Remover HR6000 thoroughly on a properly prepared surface (chemical and mechanical decontamination). Work in the shade and on cool surfaces only.

Specifications

IMPECCABLE FINISH

Truly flawless gloss with zero holograms!

LOW DUST

Extremely low dust creation during use.

FREE OF SILICONES AND FILLERS

Body shop safe.

PROFESSIONAL ZVIZZER COLOR CODE

Matching color polish and pad for optimal combination selection.

Product sheet
Use with orbital machine
Yes
Use with roto-orbital machine
Yes
Use with rotary machine
No
Cut Level
2/10
Finish level
9/10
Integrated synthetic protection
No
Dust creation
None
Usage precautions
Hazard statement

This mixture is not classified as hazardous according to Regulation (EC) No 1272/2008.

Contains

Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics

Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products