OS 3000 ONE STEP Zvizzer - ZV017OS
Zvizzer
ZV017OS

OS 3000 ONE STEP

Professional Medium Cut polish by ZviZZer, delivering the perfect balance between correction and finishing. 

  • Volume: 750ml.
  • Correction and finishing in a single pass.
  • All types of varnishes/paints
€77.26
You must be logged in
In stock - shipped within 24h/72h
Only a few items left
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 7 points loyalty. Your cart total will be 7 points equivalent to a discount voucher of €1.40
Description

ZviZZer One Step (OS 3000) is a professional-range polish with intermediate cut (medium cut) for correcting common paint defects (micro-scratches, light sanding haze, holograms, insect marks, etc.)

This new-generation water-based polish offers very interesting cut (capable of tackling 3000 grit wet sanding), while also delivering a defect-free deliverable finish.

Body shop and paint shop professionals will find great value in it for the speed of achieving correction/finishing results compared to other competing professional brands typically found in workshops.

ZviZZer One Step (OS 3000) belongs to the One Step polish category, for correction and finishing in a single pass, with possible use on various foam pads from the Thermo pro range (Green/Blue/Black). Its versatility is such that this polish will become a true "Swiss Army knife" for a perfect balance between correction and finishing.

Like all polishes in the ZviZZer professional range, One Step (OS 3000) will produce very little dust, can be worked for a long time while remaining fluid enough not to dry out too quickly. A real advantage for the professional looking to optimize their quality and working conditions.

The ultimate weapon for those looking to improve the aesthetic appearance of their vehicle in minimum time. Please note that it does not contain any protection, unlike ZviZZer One Polish from the Detailer range.

Although initially intended for use with the professional Thermo Pad Blue, in line with the characteristic ZviZZer color code for the professional range, you can nonetheless use ZviZZer One Step (OS 3000) with all pad colors in the range, as this polish is so versatile. You can thus vary your combination, steering it more toward cut or finishing.

The oils contained in this polish will provide a very oily, smooth finish on your vehicle. Wiping off ZviZZer One Step (OS 3000) is also fairly easy, not too greasy under the microfiber.


You should therefore make sure to thoroughly degrease your surfaces with an alcohol-based solution (e.g. Clean Top) before applying a ceramic coating, for example.


Available in 750ml.

Learn more about Zvizzer

** Zvizzer - German Innovation at the Service of Automotive Polishing **

ZviZZer is a German brand specializing in automotive polishing, recognized for its expertise and innovation. It offers a complete range of foam, wool, and microfiber pads, as well as next-generation water-based polishes, guaranteeing dust-free and odor-free use. Zvizzer brings disruptive innovation to Detailing: THERMO foams, which do not deform with heat during polishing, allowing you to work your polish much longer without damaging your pad.

To be used with
Instructions for use

How to use ZviZZer One Step (OS 3000)?

  1. Shake the bottle well before use.
  2. Choose your pad to use with ZviZZer One Step OS 3000 (Thermo Pad Blue preferably)
  3. Apply the polish directly onto the surface, about the size of a hazelnut.
  4. Start by spreading your polish at low speed (speed 2 on a dual action polisher), then increase to speed 5 to 6 depending on the level of correction required.
  5. Work on a 60x60cm section in straight-line, criss-cross passes.
  6. Buff off with a microfiber towel like Cocktail Microfibers Black Velvet for a perfect finish.

Tip: Make sure to work ZviZZer One Step OS 3000 on a properly prepared surface (chemical and mechanical decontamination). Work in the shade and on cool surfaces only.

Specifications

PERFECT BALANCE BETWEEN CORRECTION/FINISH

Excellent choice for good correction and a streak-free finish.

TIME SAVING

One Step compound, a single pass to correct and finish simultaneously.

LOW DUST

Very low dust during use.

PROFESSIONAL ZVIZZER COLOR CODE

Matching polish/pad color for an optimal combination choice.

Product sheet
Use with orbital machine
Yes
Use with roto-orbital machine
Yes
Use with rotary machine
No
Cut Level
6/10
Finish level
8/10
Integrated synthetic protection
No
Dust creation
None
Usage precautions
Hazard statement

This mixture is not classified as hazardous according to Regulation (EC) No 1272/2008.

Contains

Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics

Our customers' reviews of this product
FAQ
You may also like
Recently viewed products