Heavy Polishing Pads Nanolex Nanolex - NO73HPPN
Polishing Pad Heavy - Hard - Grey - NXPPAD64 - Nanolex
Polishing Pad Heavy - Hard - Grey - NXPPAD43 - Nanolex
Polishing Pad Heavy - Hard - Grey - NXPPAD61 - Nanolex
Polishing Pad Heavy - Hard - Grey - NXPPAD - Nanolex
Polishing Pad Heavy - Hard - Grey - NXPPAD64 - Nanolex
Polishing Pad Heavy - Hard - Grey - NXPPAD43 - Nanolex
Polishing Pad Heavy - Hard - Grey - NXPPAD61 - Nanolex
Nanolex
NO73HPPN-2

Heavy Polishing Pads Nanolex

Heavy correction pad to use with Nanolex Heavy Cut polish.
Sizes 75/125/150mm

€11.75
Out of stock
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 1 points loyalty. Your cart total will be 1 points equivalent to a discount voucher of €0.20
Description

This Heavy Cut Polishing Pad by NANOLEX allows you to tackle deep and difficult-to-remove scratches.
Featuring a very dense foam structure that is especially resistant to pressure, you will maintain a consistent cutting power with the most aggressive polishes (compounds).

Ideally paired with the brand's Heavy Cut polish, the combination will work on the hardest paint finishes.

Ultra Cut Polishing Pad features an advantageous conical shape, allowing you to reach panel edges for complete precision work. This shape also helps to better distribute pressure across the width of the pad. The center hole helps with centering the pad on the backing plate and, more importantly, better dissipates heat during use.

Available in different sizes (75mm/125mm/150mm), the Heavy Cut Polishing Pad is compatible with the various backing plates commonly found on the market (3'/5'/6'). Its unique grey color allows you to distinguish and identify it at a glance among the other colors in the NANOLEX pad range.

This polishing pad can be used with both a dual-action orbital polisher or a rotary polisher.

Available sizes:

- 75mm (Backing plate width: 75mm / Base width: 95mm / Thickness: 25mm)
- 125mm (Backing plate width: 125mm / Base width: 145mm / Thickness: 25mm)
- 150mm (Backing plate width: 150mm / Base width: 170mm / Thickness: 25mm)

Learn more about Nanolex

** Nanolex - German Excellence in Automotive Care **

Founded in 2007 in Mandelbachtal, Germany, Nanolex Car Care quickly gained recognition thanks to its range of exceptionally high-quality automotive care products. Designed for both enthusiasts and professionals, Nanolex products are developed, tested, and produced in Germany, adhering to the highest industry standards. In collaboration with Infinitec GmbH, Florian Kessler and Andreas Neuner combined entrepreneurial and scientific expertise to create innovative detailing solutions. Based in Saarbrücken, the brand continues to push the boundaries of innovation and performance.

To be used with
Instructions for use

How to use the NANOLEX Heavy Cut Polishing Pad?

  1. Checks: Always ensure that the diameter of your pad is greater than or equal to the diameter of your backing plate.
  2. Placement: Center your pad on your backing plate.
  3. Polish: Spread your polish in a ring around the pad
  4. Work: Work your polish one section at a time, applying moderate pressure on the pad according to the defects to be corrected.
  5. Cleaning: Always remember to clean your pad during polishing (brush, compressed air, etc.)

Tip: For best results, use a dedicated pad cleaning brush (e.g., RUPES Claw Pad Tool). 

Specifications

PREMIUM QUALITY 

Excellent build quality, durable foam resistant to pressure.

TAPERED PROFILE

The tapered profile of the pad allows high precision along panel edges.

DIFFERENT SIZES 

The standard large sizes are available (75mm/125mm/150mm)

COLOR CODE

One color per pad aggressiveness level, easily identifiable.

Care instructions

Carefully wash your pad in lukewarm water with a small amount of pad cleaner or microfiber detergent once your paint correction is complete. Never wring out the pad; instead, squeeze it between your fingers and let it dry on a drying rack, for example.

Product sheet
Color
Gray
Size
75mm/125mm/150mm
Polisher Type
orbital/rotary
Machine Use
Yes
Cut level
7/10
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products