Hendlex
HE001DC
DC 60 Sprayable Ceramic - 200ML
Sprayable ceramic, easy to use with surprising results.
200ml.
€59.95
In stock
- shipped within 24h/72h
Pay in 3 installments with
from €100 of purchase.
By purchasing this product you can earn up to 5 points loyalty.
Your cart total will be
5 points equivalent to a discount voucher of €1.00
from €100 of purchase.
Description
A ceramic coating has never been so easy to apply as with DC 60 by the brand HENDLEX.
With DC60, you benefit from a surprisingly effortless application. If you know how to use a Quick Detailer, you'll know how to use this product.
Simply spray onto a microfibre cloth, spread, and wipe off. That's it.
Of course, perfect surface preparation will be required as always (decontamination and degreasing with Paint Prepare for example, or even a light polish).
DC60, once applied to your bodywork or your wheels, will leave a durable hydrophobic protection resistant to external agents (alkaline pre-wash foams, bird droppings, etc.). In addition, gloss will be significantly enhanced.
Dry time after application: 12 to 24 hours depending on the temperature conditions of your garage. 7 days before the first wash.
A must-have for those looking for an easy-to-apply, durable, multi-surface protection solution with great gloss.
200ml bottle, allowing treatment of approximately 3 cars, supplied with 3 spray tops. To be used within 3 months of opening.
Set contents
- Hendlex Sprayable Ceramic DC60 (200 ml): Gentle, non-abrasive cleaning agents
- Spray bottles (3 pieces)
- Application microfibre cloth (1 piece)
- Application guide
Learn more about Hendlex
Lithuanian brand of nano-technology technical products for multi-surfaces.
To be used with
Instructions for use
- Preparation: Wash and thoroughly dry the vehicle to remove all dirt and contaminants. Decontaminate the surface with a clay bar if necessary.
- Application: Shake the bottle of DC 60 Sprayable Ceramic well before use. Spray a small amount of product onto a microfiber.
- Spreading: Spread the product evenly over the surface using straight-line motions until the surface is fully covered with a uniform, wet layer. It is recommended to work in small sections.
- Flash: Allow the coating to cure for 1 minute or until the uniform coating layer begins to turn into dispersed droplets.
- Wiping: Use a clean, dry microfiber to wipe until all excess coating has been removed. Perform a second finishing wipe after turning the microfiber to a dry section, until a glossy, streak-free finish is achieved.
- Curing: Allow the coating to cure for at least 24 hours without exposing the vehicle to water or moisture. (12 hours if the vehicle is kept in a location with a temperature above +20°C)
Features and benefits:
- Long-lasting protection: Up to 24 months of protection against UV rays, dirt, contaminants, and light scratches.
- Hydrophobic effect: Repels water and liquids, making cleaning easier.
- Enhanced gloss: Enhances the shine and depth of the paint.
- Ease of application: Spray formula for quick and easy application.
Maintenance tips:
Avoid washing the vehicle with aggressive chemicals for at least one week after application to ensure optimal coating adhesion. For continuous protection, reapply every 12 to 24 months.
Care instructions
- Surfaces d'application: Surfaces peintes et vernies, plastique et métal - Superficie couverte: 50-70 ml pour une voiture de taille moyenne - Durabilité: Jusqu'à 1-2 ans, selon les conditions météorologiques - Durée de conservation: 1 an, sans ouvrir la bouteille - Résistance thermique: -30 °C à +150 °C - Résistance chimique: 2<pH<13 - Angle de contact avec l'eau: 103° - Température d'application: +10 °C à +25 °C (recommandé +20 °C) - Période de durcissement: 12 à 24 heures initiales ; finale de 7 jours - Conditions de stockage: +5 °C à +25 °C
Product sheet
Application surfaces
Painted and varnished surfaces, plastic and metal
UFI
1300-60HA-700E-5YSK
Surface covered
50 - 70 ml for a medium-sized car
Contact angle
103°
Application temperature
+10°C to +25°C (recommended +20°C)
Min. cure time
12 to 24 initial hours
Full cure time
7 days
Durability
Up to 1 to 2 years, depending on weather conditions
Storage temperature
+5°C to +25°C
Shelf life
1 year without opening the bottle
pH resistance
2 - pH -13
Temperature resistance
-30°C to +150°C
Warning statement
DANGER
Usage precautions
Hazard statement
H226 - Flammable liquid and vapor.
H302 - Harmful if swallowed.
H304 - May be fatal if swallowed and enters airways.
H314 - Causes severe skin burns and eye damage.
H336 - May cause drowsiness or dizziness.
H412 - Harmful to aquatic life with long lasting effects
Contains
EUH066 Repeated exposure may cause skin dryness
or cracking. Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, <2% aromatics
Cyclosilazanes, di-Me, Me hydrogenated, polymers with di-Me, Me hydrogenosilazanes,
reaction products with 3-aminopropyltriethoxysilane
DANGER - Observe usage precautions
UFI:1300-60HA-700E-5YSK
Our customers' reviews of this product
Frequently questions
FAQ
Be the first to ask a question about this product!
Question about the product
You may also like
Recently viewed products
