Ceramic Coat FS60 - 40ML Hendlex - HE002FS
Hendlex Ceramic Coat FS60 Advanced Nano ceramic - 40ml - FS60S - Hendlex
Hendlex Ceramic Coat FS60 Armor Tech System - 40ml - FS60S - Hendlex
Hendlex Ceramic Coat FS60 Armor Tech System - 40ml - FS60S - Hendlex
Hendlex Ceramic Coat FS60 Advanced Nano ceramic - 40ml - FS60S - Hendlex
Hendlex Ceramic Coat FS60 Armor Tech System - 40ml - FS60S - Hendlex
Hendlex
HE002FS

Ceramic Coat FS60 - 40ML

Ceramic treatment, 9H hardness, complete kit.
40ml.

€54.95
You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 5 points loyalty. Your cart total will be 5 points equivalent to a discount voucher of €1.00
Description

HENDLEX offers with Ceramic Coat FS60 a very high quality ceramic treatment, highly durable and with excellent chemical resistance.

The complete kit provided will allow you to treat approximately one full car.

Once treated with Ceramic Coat FS60, your car will gain tremendously in color depth (black will be blacker, for example), will have an anti-static effect, and will benefit from an enormous shine.

Also, the water contact angle of FS60 is 105°, which will greatly ease your washing thanks to the strong hydrophobic effect created.

Ceramic Coat FS60 is suitable for all painted surfaces, including rims.

As always, perfect surface preparation will be required, including light polishing and above all perfect surface degreasing (Paint Prepare).

Allow to dry for 24 hours after application at a minimum temperature of 18°C ideally.

Learn more about Hendlex

Lithuanian brand of nano-technology technical products for multi-surfaces.

To be used with
Instructions for use
  1. Preparation: Wash and dry the vehicle thoroughly to remove all dirt and contaminants. Decontaminate the surface with a clay bar, polish, and degrease if necessary.
  2. Application: Shake the Ceramic Coat FS60 bottle well before use. Generously saturate your suede applicator at the start, then apply a few drops of product with each reload.
  3. Distribution: Treat an area no larger than 60x60cm at a time. Spread the product evenly over the surface using straight cross-hatch motions, always working in small sections.
  4. Drying: Wipe almost immediately with the supplied microfiber towel or a Black Velvet; do not allow to dry for more than 30sec.
  5. Finishing: Use a clean, dry microfiber towel to wipe and polish the surface until you achieve a glossy, streak-free finish. Inspect your work and, in case of an error, go over it again immediately.
  6. Curing: Allow the coating to cure for at least 24 hours without exposing the vehicle to water or moisture.

Features and benefits:

  • Long-lasting protection: Up to 24 months of protection against UV rays, dirt, contaminants, and light scratches
  • Hydrophobic effect: Repels water and liquids, making cleaning easier
  • Enhanced gloss: Improves paint shine and depth
  • Easy application: Easy-to-apply formula for professional protection

Compatibility: 

Suitable for all types of automotive paint, including metallic and clear-coated paint.

Care instructions

Avoid washing the vehicle with harsh chemicals for at least one week after application to ensure optimal coating adhesion. For ongoing protection, reapply every 12 to 24 months.

For maintenance washes, use a suitable shampoo, such as Reset Intensive Car Shampoo from CARPRO.

Caution!

  • Do not apply the coating to matte surfaces or in direct sunlight.
  • Suitable application temperature range: +10 °C to +25 °C.
  • Do not apply if the temperature is above +30 °C.
  • Make sure all parts of the coating are thoroughly wiped.
Product sheet
Application surfaces
Painted and varnished surfaces, plastic and metal
Surface covered
40 ml for a medium-sized car (i.e. one vial)
Contact angle
105°
Application temperature
+10°C to +25°C (Recommended 20°C)
Min. cure time
12 to 24h
Full cure time
7 days
Durability
Up to 1-2 years, depending on weather conditions
Storage temperature
+5°C to +25°C
Shelf life
1 year, unopened bottle
pH resistance
2 - pH - 13
Temperature resistance
-30°C to +150°C
Warning statement
DANGER
Usage precautions
Hazard statement

H304 - May be fatal if swallowed and enters airways.
H336 - May cause drowsiness or dizziness.
H412 - Harmful to aquatic life with long lasting effects.

Contains

Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, <2% aromatic

DANGER - Observe usage precautions
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products