-15%
Rupes
RU137ILNMKII
Bigfoot Nano iBrid Long Neck Mark II - HR81MLII/STB
Bigfoot Nano iBrid Long Neck Mark II - HR81MLII/STB is the latest evolution of the famous RUPES mini polisher, here in Standard Basic version.
- 2 batteries
- 1 charger
- Bigfoot Nano iBrid Long Neck Mark II polisher
€641.58
€754.80
In stock
- shipped within 24h/72h
Only a few items left
Pay in 3 installments with
from €100 of purchase.
No reward points for this product, as it already benefits from a discount.
from €100 of purchase.
Description
Bigfoot Nano iBrid Long Neck Mark II is the more powerful, versatile and innovative evolution of the already very famous first-generation Ibrid Nano.
RUPES has equipped its polisher with the SMARTFIX system to mount and dismount attachments very easily and quickly.
Furthermore, this superb polisher is equipped with a transmission reducer and can now operate in rotary motion up to 2000 rpm, even with 50mm backing plates. The torque thus remains constant throughout the process and guarantees better control.
This Bigfoot Nano iBrid Long Neck Mark II polisher will therefore be perfect for any user, professional or hobbyist, wishing to access the tightest spots (inter-logo spaces, grille inserts, wheel spokes, etc.). Its small size and quick backing plate change capability will deliver an incredibly ergonomic working experience. A significant time saver for any professional.
Offered here in Standard Basic version, you will find the polisher with 2 batteries and their wired charger.
Learn more about Rupes
Rupes has become the reference when it comes to orbital polishers and polishing pads. Rupes pads are developed to be compatible with the polishes from the same brand.
To be used with
Instructions for use
How do you use Bigfoot Nano iBrid Long Neck Mark II by RUPES?
- Insert a battery into the polisher until it "clicks".
- Choose your tool and backing plate, then fit it to the polisher using the highly practical SMARTFIX system.
- Finally, choose the appropriate pad according to the size of your backing plate and the required firmness for the job at hand.
- Set the speed controller to the desired speed (start at speed 3 for spreading and increase to speed 5-6 for heavy correction with compounds).
- Press the upper trigger to start working.
Tip: Never start the polisher unless it is in contact with the body panel. Keep it flat against the surface while working. Always keep a charged battery, or one charging on the supplied charger, within reach. Do not work in direct sunlight or on a hot surface.
| HR81MLII | |
| Voltage (VDC) | 10,8-12 |
| R.P.M. | 2000-5000 |
| Battery life (min) | ~ 30min* |
| Charging time (min) | ~ 20min* |
| Electronic speed control | • |
| Overcurrent protection | • |
| Soft Start | • |
| LED indicator | • |
| Dimensions (mm) | 336x88x48** |
| Head height with protection [mm] | 63** |
| Weight (g) | 500** |
Specifications
HIGHER-TORQUE MOTOR
More power and torque in this upgraded version.
PRACTICAL SMARTFIX SYSTEM
Very easy and quick tool fitting with SMARTFIX.
2 BATTERIES
Kit including 2 batteries so you never run out of power.
PERFECT ACCESSIBILITY
Perfect access to areas unreachable with larger machines.
Care instructions
After use, set the speed controller to off. Disconnect the battery from the polisher to prevent discharge. Remember to fully recharge your batteries for your next polishing session.
- Storage: Store the product in a cool, dry place away from direct sunlight.
- Handling: Anyone can use this polisher, but polishing knowledge is required to use it properly.
Our customers' reviews of this product
Frequently questions
FAQ
Be the first to ask a question about this product!
Question about the product
You may also like
Recently viewed products