RUPES LH19E STANDARD KIT Rupes - RU032LH-1
Rupes
RU032LH-1

RUPES LH19E STANDARD KIT

The brand new generation of Rupes rotary machine! Here in Standard kit.

€445.95
You must be logged in
In stock - shipped within 24h/72h
Only a few items left
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 44 points loyalty. Your cart total will be 44 points equivalent to a discount voucher of €8.80
Description

The RUPES LH19E is a rotary polisher, it is the third generation of dual-gear rotary machines using a 1200-watt motor designed by RUPES.


The RUPES LH19E has an adjustment knob for greater precision.

It can operate efficiently both at low speed around 400rpm and at high speed.

Equipped with a very high-torque motor, a compact design, premium ergonomics and a lightweight housing, the RUPES LH19 is one of the most powerful and most maneuverable rotary polishers on the market.

Its lightweight yet powerful design makes it the ultimate rotary polishing solution for professional detailers, body shop technicians, but also for marine use and much more.

The advantages of using the RUPES LH19E polisher are numerous, including:

  • Rotary motion allowing time savings. Greater correction capacity compared to an orbital motion, but to be reserved for experienced detailers to avoid any risk of overheating or burning through the paint. 
  • The U-handle supplied with the machine allows tilt adjustment for perfect ergonomics. In addition, its construction with an absorbent rubber helps to eliminate any unwanted vibrations.
  • The side handle, which can be screwed on the left or right depending on whether you are left- or right-handed, also provides an excellent grip and reduces vibrations.
  • A 9m cable length will allow you to move comfortably around the car.
  • The speed control dial, ideally positioned at the top of the body, allows direct control over the desired rotation speed.
  • The trigger is progressive and will allow the speed setting to be managed gradually.

The RUPES LH19E is the ultimate tool, to be reserved for experienced detailers, in order to get the most out of it for an impeccable result.

The RUPES LH19E standard kit includes two polishing pads and two polishes, designed to work together and with this rotary polisher.

Also available as machine only.

Contents of the RUPES LH19E STD kit:

  • 1x Rotary polisher (LH19E)
  • 1x 250ml COARSE polishing compound (9.BRCOARSE250)
  • 1x 250ml FINE polishing compound (9.BRFINE250)
  • 1x COARSE foam polishing pad Ø135mm (9.BR150H)
  • 1x FINE foam polishing pad Ø135mm (9.BR150M)
  • 1x Backing Plate Ø125mm (992.500)
  • 1x U-handle (811.374)
  • 1x Side handle (81.322)
  • 1x Cable clamp (9.Z1024)
Learn more about Rupes

Rupes has become the reference when it comes to orbital polishers and polishing pads. Rupes pads are developed to be compatible with the polishes from the same brand. 

To be used with
Instructions for use

How to use the RUPES LH19E rotary polisher?

  1. Pad/compound selection: Choose the pad/compound combination best suited to the task (specific blue or yellow foam pad depending on the level of defect correction required).
  2. Placement: Center your pad on the backing plate.
  3. Polish: Spread a ring of polish around the outer edge of the pad, or apply 3-4 pea-sized drops around the perimeter.
  4. Working: Work the compound on one section at a time, spreading quickly without pressure at speed 2, for example. Then increase to speed 4 or higher to work the polish slowly in overlapping cross-hatch passes, keeping the machine constantly moving! Never leave the machine stationary on a section. Work the polish until the residue turns translucent.
  5. Wipe down: Wipe away polishing residue once the film turns translucent. Use the dedicated color-coded microfiber towel included in the kit.
  6. Inspection: Always remember to wipe down again with an isopropyl alcohol-based solution to inspect your work (e.g., Rupes Reveal Lite).
  7. Finishing: Always follow with a finishing pass using the Yellow RUPES Pad (Fine Polishing Pad) and the dedicated compound (RUPES Fine Rotary Compound Gel).

Tip: For best results, use the dedicated pad cleaning brush (Claw pad tool not included in the kit). Replace your foam pad regularly as soon as it becomes saturated.

Specifications

POLISH/PAD KIT

Machine kit with 2 matching pads and polishes.

PERFECT ERGONOMICS

Ideal grip and handling, with or without handle.

PERFORMANCE

1200W motor, powerful and high-performing.

PROGRESSIVE TRIGGER

Trigger allowing precise speed control.

Care instructions

Always polish with the polisher kept flat against the panel. Keep the machine moving across the surface at all times! Do not apply heavy pressure over sharp body lines.

Product sheet
Polisher Type
Rotary
Ø Platen diameter [mm - in]
125 - 5” / 150 - 6” / 165 - 6.5”
Power [W]
1200
R.P.M.
450-1700
Speed control
Yes
Platen mounting
M14
Included platen reference
992.500
Electric cable [m - ft]
9 - 30'
Weight [kg]
2,2
Ø Pad Maxi (mm)
200
Supplied handle reference
811.374
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products