DQuartz GForce 50mL Carpro - CP142DQGF
CARPRO DQuartz GForce (50mL)
CARPRO DQuartz GForce (50mL)
CARPRO DQuartz GForce (50mL)
CARPRO DQuartz GForce (50mL)
CARPRO DQuartz GForce (50mL)
Carpro
CP142DQGF

DQuartz GForce 50mL

CARPRO DQuartz GForce ceramic coating for glass surfaces based on diamond nano-particles.

50 mL.

€83.95
You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 8 points loyalty. Your cart total will be 8 points equivalent to a discount voucher of €1.60
Description

The brand new ceramic treatment for glass surfaces by CARPRO. GForce pushes the limits even further by offering a treatment that is more water-repellent, durable and easy to apply.

Based on the formulation of the excellent DQuartz, GForce will provide a water-repellent effect from as low as 50km/h on prepared surfaces, lasting tens of thousands of kilometers. You will thus gain in driving safety, particularly in rainy or nighttime conditions.

The benefits of GForce don't stop there. You will find maintenance easier, especially when dealing with insect smears in summer.

The diamond particles that make up GForce, just like DQuartz, help reinforce surface hardness and consequently minimize wiper blade marks.

Suitable for everyone, GForce will become your new go-to glass treatment.

Apply on clean, polished and degreased glass. Wait a minimum of 4 hours before exposing the vehicle to water after treatment and wait approximately 24 hours before using the wipers.

Available in 50ml.

Learn more about Carpro

** CARPRO - Pioneer of Nanotechnology in Automotive Care ** 

Founded in 2009, CARPRO quickly established itself as a global leader in the automotive detailing industry, thanks to its mastery of nanotechnology.

To be used with
Instructions for use

 How to use DQuartz GForce by CARPRO?

  1. Optional: Polish the glass. (Polishing is not required, but unpolished glass will need two coats; polished glass requires only one coat.)
  2. Thoroughly clean the glass with CARPRO Eraser.
  3. Pour a few drops of Dquartz GForce ceramic onto the supplied cotton applicator. !
  4. Apply the product using circular motions in an organized pattern over the glass. Ensure the application is as even as possible. Wipe away any excess or haze immediately after application. You may also apply more product to hazy areas to eliminate them.
  5. Second coat: Wait 30 minutes, then repeat step 3 to apply a second coat. (Polished glass does not require a second coat.)
  6. Application to side windows: Only one coat is required for side windows.
  7. Curing: Keep the surface dry for 4 hours and do not use the windshield wipers for 24 hours.

Tip : Applying too much product can cause streaks. Do not use more than 3 to 4 drops per section (for example, half the windshield)

Product sheet
Physical state
Liquid
UFI
PJ9X-FJG5-P41A-XEQ6
Dry storage time
4 hours
Full cure time
48 hours
Time between 2 coats
30 minutes
Warning statement
DANGER
Enhancement with IR lamps
Yes
Removed with
Polishing
Time and Temperature for IR
10 min / 60°C
Hardness improvement
+1 H
Vulnerability to Water Stains
Low
Usage precautions
Hazard statement
  • H226 - Flammable liquid and vapor.
  • H304 - May be fatal if swallowed and enters airways.
  • H317 - May cause an allergic skin reaction.
  • H319 - Causes serious eye irritation.
Contains
  • Heavy aliphatic naphtha solvent (petroleum);
  • Straight-run kerosene 3-trimethoxysilylpropane-1-thiol
DANGER - Observe usage precautions
UFI:PJ9X-FJG5-P41A-XEQ6
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products
Pro tips to guide you
What protection should you choose to protect your vehicle?
Discover more articles