Zvizzer
ZV034TALG-6
THERMO ALLROUNDER Ultra Soft Pad
Finishing pad from the German brand ZviZZer, to correct the finest defects and holograms, achieving a perfect finish.
- Available sizes: 35/55/76/125/150mm.
- Thermo Foam.
- Semi-flexible interface between the foam and the hook-and-loop
- Very resistant hook-and-loop
- For use with dual-action or rotary polisher.
€14.04
(€14.04 l'unité)
In stock
- shipped within 24h/72h
Pay in 3 installments with
from €100 of purchase.
By purchasing this product you can earn up to 67 points loyalty.
Your cart total will be
67 points equivalent to a discount voucher of €13.40
from €100 of purchase.
Description
The Thermo Allrounder Ultra Soft Green pad is an exceptionally manufactured pad, dedicated to pure finishing work or the application of waxes and glazes. ZviZZer needs no introduction when it comes to the quality and durability of their polishing foams. A current worldwide reference.
The build quality is evident in the strength of the hook-and-loop on one hand, with a very strong adhesive between the foam and the interface. Also, the trapezoidal cut is perfectly shaped and chamfered for greater durability. The honeycomb and aerated foam structure also ensures perfect heat distribution. The central hole in the pad also allows excess heat to dissipate during use.
The interface between the foam and the hook-and-loop provides even greater stability compared to other ZviZZer Trapez pads. A notable advantage when you want to maintain control of the pad on flat surfaces.
The Thermo foam used in this pad is very special and allows it to resist deformation under pressure, while preventing the pad from softening and completely losing performance. This Thermo foam, which equips all ZviZZer foam pads, delivers considerably greater performance and pad durability (up to 3 to 4 times longer than a similar pad in traditional foam).
ZviZZer uses a registered and protected color code system specific to their pad range, to perfectly identify which polish should be used with which pad and also potentially with which drying microfiber. Thus, Thermo Allrounder Ultra Soft Green can be used with ZviZZer Ultrafine Cut Swirl Hologram Remover & Sealing (UC 1000) polish or any other finishing polish from another brand.
The fineness of the foam on this ultra-finish pad will ensure a perfect finish even on the most delicate and difficult paint shades (high gloss direct, solid finish, etc.)
You can also use this pad to apply liquid waxes or your favourite glaze.
A pad of exceptional quality, durable and versatile as it can be used with a dual-action or rotary polisher, ensuring a perfect finish in all circumstances.
Available in sizes:
- 55/20/35mm
- 70/20/55mm
- 90/20/76mm
- 140/20/125mm
- 160/20/150mm.
Available individually or in packs.
Main specifications of the ZviZZer Thermo Allrounder Ultra Soft Green Pad:
- Abrasiveness: Ultra fine.
- Thermo Foam
- Color: Green
- Thickness: 20mm
- Interface for improved stability.
- Very resistant hook-and-loop.
Learn more about Zvizzer
** Zvizzer - German Innovation at the Service of Automotive Polishing **
ZviZZer is a German brand specializing in automotive polishing, recognized for its expertise and innovation. It offers a complete range of foam, wool, and microfiber pads, as well as next-generation water-based polishes, guaranteeing dust-free and odor-free use. Zvizzer brings disruptive innovation to Detailing: THERMO foams, which do not deform with heat during polishing, allowing you to work your polish much longer without damaging your pad.
To be used with
Instructions for use
How do you use the ZviZZer Thermo Allrounder Ultra Soft Green pad?
- Choose the right pad size for your backing plate (e.g., a 125/140 mm size from ZviZZer is suitable for a 125 mm/5" machine backing plate).
- Center your pad on your backing plate.
- Apply a large dime-sized drop of polish (e.g., Ultrafine Cut Swirl Hologram Remover & Sealing UC 1000) directly to the surface or a few pea-sized drops onto the pad.
- Spread your polish quickly and at low speed over an area no larger than 60x60 cm.
- Then work your polish at low speed (speed 4 on a dual-action or 900–1000 rpm on a rotary) using slow, straight passes.
- Finish your pass when the residual polish film is very thin, almost clear.
- Wipe off the polish with a suitable microfiber towel (e.g., Microfibre Cloth Green) using a mist of Clean Top (alcohol-based).
- Inspect your finish and follow up with a protective wax.
Tip: Remember to regularly clean your pad with the ZviZZer Pad Cleaner solution to keep your foam completely free of polish residue. Your workflow and results will be much better. Spray Pad Cleaner directly onto the pad, work it in with your fingers, then wipe clean with a microfiber towel or run the pad through a Pad Washer.
Specifications
BUILD QUALITY
One of the best pad finishes currently on the market. Highly durable hook and loop backing.
THERMO FOAM
Specialized foam resistant to deformation and temperature buildup.
INTERFACE LAYER
Semi-rigid interface between the foam and the hook-and-loop backing ensuring outstanding stability.
DUAL ACTION/ROTARY
Pad suitable for use with a dual-action or rotary polisher.
Care instructions
- Always clean your pad regularly with Pad Cleaner
- Never leave an object or tool resting on the pad.
- Never wash a pad in a washing machine.
- Always pull gently on the hook-and-loop backing to remove the pad from the backing plate.
Product sheet
Color
Green
PAD material
Foam
PAD Technology
Thermo
Use with orbital machine
Yes
Use with roto-orbital machine
Yes
Use with rotary machine
Yes
Integrated PAD interface
Yes
Foam density COLD (kPa)
5
HOT foam density (kPa)
4
Cells (1-cm-line)
22/24
Our customers' reviews of this product
Frequently questions
FAQ
Be the first to ask a question about this product!
Question about the product
You may also like
Recently viewed products