White X-Slim Heavy Cutting Pad Flexipads - FP009WH
Flexipads Hard Polishing Pad
Flexipads Polishing Pad for Heavy Defect Correction
White X-Slim Heavy Cutting Pad Flexipads
Flexipads Hard Polishing Pad
Flexipads Polishing Pad for Heavy Defect Correction
Flexipads
FP009WH-1

White X-Slim Heavy Cutting Pad

X-Slim pad (18mm thickness) very hard for correcting major defects.

  • Available in 90mm, 135mm and 160mm.
  • Sold individually.

€8.95
Out of stock
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 1 points loyalty. Your cart total will be 1 points equivalent to a discount voucher of €0.20
Description

Flexipads presents here its hardest pad for correcting the most resistant clear coats and/or those with the most pronounced defects.

Its reduced thickness (18mm) further increases its effectiveness on deep defects while still leaving a beautiful finish.

Its extremely dense foam is of very high quality and thus ensures good durability.

The White X-Slim Heavy Cutting pad should be used with a highly abrasive polish (compound) to get the best out of this pad.

Be sure to match the size of your pad to your backing plate.

Available in 90mm, 135mm and 160mm.

Sold individually.

Learn more about Flexipads

Flexipads is the largest European manufacturer of polishing pads and accessories.

To be used with
Instructions for use

How do you use the Flexipads X-Slim Heavy Cutting Pad?

  1. Choose a suitable abrasive polish (compound) and apply a small amount to the pad.
  2. Attach the pad to the compatible backing plate.
  3. Spread the polish over a small area to be treated.
  4. Adjust the speed of your polisher according to the desired correction.
  5. Work in small sections using cross-hatch movements.
  6. Clean the pad regularly to remove accumulated residue.
  7. Inspect the surface and repeat if necessary until you achieve the desired result.
  8. Finish with a finishing pad and polish for a perfect gloss.

Tip: Clean the pad with a dedicated brush after each use to extend its service life.

Specifications

POWERFUL CORRECTION

Designed to remove major defects from hard clear coats.

OPTIMIZED THICKNESS

18 mm thickness for increased efficiency and precise control.

EXCEPTIONAL DURABILITY

An ultra-dense foam that withstands the most intensive sessions.

UNIVERSAL COMPATIBILITY

Available in several sizes to fit different machines and backing plates.

Care instructions

Clean the pad with lukewarm water and/or a pad cleaner such as Pad Cleaner Zvizzer.

Allow to air dry in a clean, dry place.

Avoid twisting or squeezing the pad too firmly to preserve its structure.

Product sheet
Color
White
Abrasive type
Powerful Abrasive - Compound
Cut level
7/10
Ø Pad Maxi (mm)
160
PAD material
Foam
Ø Diameter
90-135-160mm
Usage precautions
Hazard statement
  • Do not use on unpainted surfaces.
  • Avoid excessive overheating of the pad during use.
  • Wear suitable personal protective equipment (gloves and safety glasses) for safe work.
Our customers' reviews of this product
FAQ
Are Flexipads X-Slim Heavy Cutting pads suitable for beginners?
What type of polish should I use with this pad?
Can I use this Flexipads pad with any polisher?
How can I extend the life of the White X-Slim Heavy Cutting pad?
You may also like
Recently viewed products