Bigfoot HLR75 MINI IBRID POLISHER (Luxury Kit) Rupes - RU065HLR
BIGFOOT HLR75 MINI IBRID POLISHER Beta Kit
BIGFOOT HLR75 MINI IBRID POLISHER Beta Kit
BIGFOOT HLR75 MINI IBRID POLISHER Beta Kit
-15%
BIGFOOT HLR75 MINI IBRID POLISHER BETA kit - HLR75#230/H5/DE/LUX
BIGFOOT HLR75 MINI IBRID POLISHER Beta Kit
BIGFOOT HLR75 MINI IBRID POLISHER Beta Kit
BIGFOOT HLR75 MINI IBRID POLISHER Beta Kit
Rupes
RU065HLR

Bigfoot HLR75 MINI IBRID POLISHER (Luxury Kit)

Complete RUPES polishing kit with the HLR75 polisher and various accessories.

€839.46
€987.60
You must be logged in
In stock - shipped within 24h/72h
Only a few items left
Pay in 3 installments withfrom €100 of purchase.
No reward points for this product, as it already benefits from a discount.
Description

HLR75 is the latest evolution of RUPES polishers with Ibrid technology. With perfect ergonomics, the new HLR75 polisher is ideal for polishing hard-to-reach areas and curved sections thanks to its 3" (75mm) backing plate and 12mm orbit.

This exceptional machine runs on rechargeable batteries (2 supplied) with very good autonomy (expect 35–45 min per battery). This ensures perfect mobility for outdoor work away from your workshop, for example.
A wired adapter can be coupled for working from a power outlet (not included).

The polisher is started very simply via a lever, as on the eccentric sanders commonly encountered. The speed variator is perfectly positioned on the left side for full control.

Offered as the Beta pack, this HLR75 will be delivered with the new D-A polishes from the range (RUPES D-A Coarse 250ml and RUPES D-A Fine Polish 250ml), the associated pads (RUPES blue and yellow Microfibres, D-A Finishing Foam Pad, D-A Coarse Cutting Foam Pad) as well as blue and yellow wiping microfibers.

Truly an excellent machine — very high quality, versatile and ensuring perfect mobility.


Contents of the RUPES LHR Ibrid Mini Polisher Beta kit:

  • 1x RUPES HLR75 Mini Ibrid (9.HLR75)
  • 2x Lithium-ion Batteries (18V 2.5Ah) (9HB180LT)
  • 1x Battery Charger (9HC180LT)
  • 1x RUPES D-A Fine Polish 250ml (9.DAFINE250)
  • 1x RUPES D-A Coarse Polish 250ml (9.DACOARSE250)
  • 1x RUPES Yellow Microfiber (9.BF9060)
  • 1x RUPES Blue Microfiber (9.BF9050)
  • 1x RUPES D-A Finishing Foam Pad (100mm) (9.DA100M)
  • 1x RUPES D-A Coarse Cutting Foam Pad (100mm) (9.DA100H)
  • 1x RUPES D-A Coarse Wool Polishing Pad 80mm (9.NW80H)
  • 1x RUPES D-A Medium Wool Polishing Pad 80mm (9.NW80M)
  • 1x Systainer Box (891.432)
Learn more about Rupes

Rupes has become the reference when it comes to orbital polishers and polishing pads. Rupes pads are developed to be compatible with the polishes from the same brand. 

To be used with
Instructions for use

How do you use the RUPES HLR75 polisher?

  1. Pad/Polish Selection: Choose the pad and compound/polish combination suited to the required correction level (blue foam pad, yellow foam pad, or wool).
  2. Placement: Center your pad on the backing plate.
  3. Polish: Apply a ring of polish around the face of the pad
  4. Working: Start the machine by pressing the trigger lever on the front. Work your polish on one section at a time, applying moderate pressure to the pad, and begin at speed 2 to quickly spread the polish over the work area. Then increase to speed 4–5 to work the polish slowly using overlapping cross-hatch passes.
  5. Wipe-off: Wipe off polish residue once the film turns translucent.
  6. Inspection: Always remember to wipe down with an isopropyl alcohol (IPA) solution to inspect your correction work (e.g., Rupes Reveal Lite)

Tip: For best results, consider using a dedicated pad cleaning brush (not included in the kit, Claw pad tool). Regularly swap out your foam or microfiber pad as soon as it becomes saturated.

Specifications

ERGONOMICS

Highly ergonomic polisher with an excellent grip.

2 BATTERIES

Run time of approximately 30–45min per battery, allowing roughly 1h–1h30 of continuous work.

CORDLESS

Battery-powered, eliminating cable clutter.

PORTABILITY

Compact size, perfect for mobile detailing.

Care instructions

Always polish with the machine completely flat on the surface. Be sure to change your pad as soon as it gets saturated with polish. Blow out the polisher's cooling vents with compressed air to clear out dust regularly. The machine's trigger lever is delicate; handle it with care.

Product sheet
Ø Platen diameter [mm - in]
75 - 3”
Ø Orbit [mm - in]
12 - 1/2”
R.P.M.
3000-5500
Speed control
Yes
Included platen reference
990.007
VDC voltage [Volt]
18
Battery life (min)
~35/45
Charging time (min)
~35
Overcurrent protection
Yes
Soft start
Yes
LED Indicator
Yes
Dimensions [mm]
240x144x80
Weight [kg]
1,1
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products