Z-014 RS Tornador BASIC Tornador - TO003Z14
Tornador
TO003Z14

Z-014 RS Tornador BASIC

Dry pneumatic cleaning gun for hard-to-reach areas: air vents, seat rails, door pockets, grille.
Compact format – Operating pressure 6 to 9.2 bar – 1/4" air connector
Surgical precision. No liquid.

€83.95
Out of stock
Pay in 3 installments withfrom €100 of purchase.
Description

The Tornador Basic Z-014RS is the specialist in dry cleaning in the most confined areas of the vehicle. Designed to complement the Tornador range, it excels where tank-equipped guns become bulky or risky: air vents, seat rails, door pockets, dashboard shelves, handles and even the engine compartment.

Without a liquid reservoir, its compact and manageable format allows reaching the most difficult-to-access corners with a precision that no other tool can offer. The characteristic Tornador swirling effect dislodges and expels embedded dust, crumbs and debris in seconds.

Equipped with the RS pivoting air connector, it adapts to all working angles without constraint. The operating pressure of 6 to 9.2 bar guarantees sufficient power to dislodge even the most stubborn dirt in electronic gaps and complex trim.

Wherever the cleaning bottle makes access difficult, the Tornador Basic Z-014RS has proven its worth. A must-have for any detailer who wants to deliver a 100% finished job.

Prefer a large-capacity compressor, as air consumption is significant: 240-260 L/min

Learn more about Tornador

Tornador® — The original compressed-air cleaning gun for auto detailing. For over 25 years, the reference for automotive preparation professionals.

To be used with
Instructions for use

How to use the Tornador Basic Z-014RS?
1. Prepare the compressor: set the working pressure between 6 and 9.2 bar.
2. Connect the gun: plug the 1/4" connector into a clean, dry air line.
3. Target the areas: aim the cone at the area to be cleaned — air vents, seat rails, door pockets, grilles, dashboard crevices.
4. Operate in bursts: pull the trigger in short bursts to dislodge dust and debris without scattering them excessively.
5. Vacuum simultaneously: for optimal results, pair the Basic with a vacuum cleaner or the Rotador Adaptor.
6. Finish with a microfiber towel: wipe with a microfiber cloth to capture residues deposited on adjacent surfaces.
Tip: use the Basic Z-014RS before the Classic Z-010RS to blow out dry dust, then treat the surfaces with the cleaning product.
Tip: ideal for the engine bay, front grille, and areas where moisture must be strictly avoided.

Specifications

PRECISE DRY CLEANING
With no liquid tank, it precisely targets gaps, air vents, and tight crevices that are impossible to reach with a cloth.

COMPACT & MANEUVERABLE FORMAT
Streamlined and lightweight design to access hard-to-reach areas: seat rails, door pockets, grilles, and engine bays.

RS SWIVEL CONNECTOR
The swivel air inlet ensures complete freedom of movement and eliminates positioning strain during work.

COMPLEMENT TO THE CLASSIC
Ideal pairing with the Tornador Classic Z-010RS: dry blowing and dusting first, followed by deep wet cleaning.

Product sheet
Air pressure
6 to 9.2 bar
Air consumption
240-260L/min
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products
Pro tips to guide you
TORNADOR arrives at Maniac Auto! We reveal the full range.
Discover more articles