Wheel Coating Kit Gtechniq - GT058WCK
Gtechniq
GT058WCK

Wheel Coating Kit

High-temperature ceramic treatment kit for wheels, exhausts and engine, by Gtechniq.

- 250ml PW Panel Wipe
- 30ml C5 Wheel Armour
- 3x MF1 ZeroR Microfibre Buff Cloth

€69.95
You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 6 points loyalty. Your cart total will be 6 points equivalent to a discount voucher of €1.20
Description

This complete Wheel Coating Kit developed by GTECHNIQ for the preparation and high-temperature ceramic protection of your car's wheels as well as other surfaces exposed to high temperatures (exhausts, engine...)

You will find the excellent PW Panel Wipe which will allow you to thoroughly degrease surfaces before protecting them. Then, the C5 Wheel Armour treatment will grant you very long-lasting protection on wheels to prevent all the deposited dirt (brake dust, mud, tar, etc.) from adhering too strongly and becoming tedious to remove.

The three microfibers included by GTECHNIQ in the kit (MF1 ZeroR Microfibre Buff Cloth) are of excellent quality and perfectly suited for wiping down C5 Wheel Armour. The cotton applicators provided will allow you to apply C5 Wheel Armour simply yet effectively, even in hard-to-reach areas.

Once protected, your surfaces will withstand temperatures up to +600 degrees while looking significantly shinier. Compatible with all wheel surfaces, including painted, lacquered, matte or satin (avoid bare metal however).


A kit for enthusiasts — beginners or experienced — looking for quality products perfectly compatible with the surfaces of modern vehicles.


C5 Wheel Armour:

GTECHNIQ C5 Wheel Armour is a highly durable ceramic coating specifically designed to protect wheels, brake calipers and exhaust tips.

Thanks to its advanced chemical bonding technology, it forms a resistant barrier against brake dust, road contaminants and extreme temperatures up to 600°C. This product prolongs the shine of your wheels while reducing cleaning requirements.

C5 Wheel Armour offers a powerful hydrophobic effect, preventing dirt from adhering and making maintenance considerably easier. It adapts to all wheel finishes: gloss, satin or matte, as well as chrome surfaces (excluding polished metal).

With a 30ml volume you can treat the inside/outside of wheels up to 20 inches. This treatment is ideal for enthusiasts and professionals alike.

Adopt C5 Wheel Armour and turn wheel maintenance into a quick, effective and aesthetically pleasing task.



PW Panel Wipe:

Gtechniq Panel Wipe was designed to perfectly clean your paintwork without leaving any residue, in order to achieve an ideal surface before applying treatments GTECHNIQ EXO v5, C1 Crystal Lacquer, Crystal Serum Light, by eliminating oils, silicones, waxes and polish residues.
 
You can also use it to remove polish residue between the different polishing stages.
 
Panel Wipe is easy to use and promotes coating adhesion Gtechniq and contains no fragrance or colorant. 

Use undiluted, and spray either directly onto the surface or onto a microfiber.



MF1 ZeroR Microfibre Buff Cloth:

High-quality all-product wiping microfiber: 300gsm, 40x40cm, high polyamide content.


Learn more about Gtechniq

Gtechniq is one of the first Detailing brands to incorporate the concept of ceramic protection into their range. All products are developed using nano-particles called "Smart Surface Science" that offer remarkable effectiveness and durability. 

To be used with
Instructions for use

How do you use the Wheel Coating Kit by GTECHNIQ?

  1. Preparation: Thoroughly clean the surfaces to be treated first (W6 Iron Fallout Remover, for example).
  2. Pour: Pour a few drops of product onto one of the cotton pads supplied in the kit to saturate it thoroughly.
  3. Apply : Apply to the surface in overlapping straight-line motions and leave to dwell for approximately 30 seconds.
  4. Dry: Wipe with a microfiber towel (use a second microfiber towel from the MF1 ZeroR Microfibre Buff Cloth kit).
  5. Keep dry: Avoid any contact with water for at least 12 hours and do not wash the surfaces with cleaning or degreasing agents for 7 days.

Tip: Never apply to a hot surface or in direct sunlight. Do not allow it to dry on the surface for too long.

Specifications

DURABLE PROTECTION

Highly durable ceramic coating resistant to high temperatures.

MULTI-SURFACE

Compatible with wheels, exhausts, engine cylinder heads, and any surface exposed to high temperatures.

COMPLETE KIT

Includes the products and accessories needed to protect your wheels effectively.

EASY MAINTENANCE

Surfaces are very easy to clean once treated.

Care instructions

Use a pH-neutral shampoo or wheel cleaner to avoid affecting the protection. Avoid shampoos with a "wax" effect or overly powerful degreasers. Always dry the surface thoroughly after cleaning. Never apply in direct sunlight or on hot surfaces.

  • Storage: Protect from frost and high temperatures. Store between 5°C and 25°C in a dry, ventilated area. Close tightly after use.
Product sheet
Application surfaces
Rims, exhausts, engine cylinder heads
For Outdoor Use
Yes
For Indoor Use
No
Warning statement
DANGER
Contains SiO2
Yes
Usage precautions
Hazard statement
  • H225 - Highly flammable liquid and vapor.
  • H402 - Harmful to aquatic life.
  • H412 - Harmful to aquatic life with long lasting effects.
Contains
  • Heptane.
DANGER - Observe usage precautions
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products