Cquartz Fabric Coating 2.0 Carpro - CP103CF
Cquartz Fabric Coating 2.0
Cquartz Fabric Coating 2.0
Cquartz Fabric Coating 2.0
Cquartz Fabric Coating 2.0
Cquartz Fabric Coating 2.0
Cquartz Fabric Coating 2.0
Cquartz Fabric Coating 2.0
Cquartz Fabric Coating 2.0
Cquartz Fabric Coating 2.0
Carpro
CP103CF-2

Cquartz Fabric Coating 2.0

Ceramic-based hydrophobic protection for convertible tops and all textiles. Improved version.
50ml/100ml/500ml/1L

€69.95

(€129.90 Litre)

You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 12 points loyalty. Your cart total will be 12 points equivalent to a discount voucher of €2.40
Description

CarPro Cquartz Fabric Coating 2.0 is the direct evolution of the already famous and reputed first version. This product protects against stains and other spills on fabrics (interior or exterior such as convertible tops). It is a nanotechnology product that offers flawless protection for your fabrics.

Version 2.0 brings significantly more durability, fewer VOCs (solvents), virtually no unpleasant odour, and considerably reduced drying times. Down from 24 hours to just 3 hours!

Treated surfaces are thus protected against liquids, dirt, oils and other stains. It therefore extends the lifespan of the material and guarantees its original colour for a long time.

CarPro Cquartz Fabric Coating 2.0 is one of the simplest products to use in our catalogue: simply spray, work into the surfaces and allow to dry! Furthermore, this product is completely respectful of the treated surface and allows it to breathe without any issues. In this way, the fabric retains its original suppleness without altering the feel.

The nanoparticles contained in this product bond automatically with the fabric fibres to form a hydrophobic barrier. Liquids slide off the surface without penetrating it.

Cquartz Fabric Coating 2.0 can be used on convertible tops, seats and all other textiles.

Consumption of approximately 100ml to 250ml per car in two coats depending on the size of a convertible top for example.

Learn more about Carpro

** CARPRO - Pioneer of Nanotechnology in Automotive Care ** 

Founded in 2009, CARPRO quickly established itself as a global leader in the automotive detailing industry, thanks to its mastery of nanotechnology.

To be used with
Instructions for use

How do you use CarPro Cquartz Fabric Coating 2.0?

  1. Thoroughly clean the surface using an appropriately diluted APC solution (CARPRO Multi X, KOCH CHEMIE Green Star, etc.)
  2. Make sure to dry the fabric surface completely. Do not use the product while surfaces are still damp!
  3. Carefully mask off surrounding areas not to be treated with tape (for example, when waterproofing a convertible top).
  4. Spray evenly over the area to be treated to create a very fine mist on the surface. Do not saturate or soak the surface under any circumstances! Ensure that no product droplets run from the sprayer and settle on the surface.
  5. Then work it in with a microfiber applicator (Microfiber Applicator), gloved hands, or preferably a simple foam sponge (COLOURLOCK Foam Sponge).
  6. Immediately spray a second even coat.
  7. After a few minutes, wipe away the excess with a new microfiber towel.
  8. Remove your protective coverings (tarps, tape, etc.) after spraying.
  9. Allow to dry for several hours without contact with water (minimum 3 hours).
Product sheet
Packaging
Bottle
UFI
W310-W0NN-U00E-NNMU
Warning statement
DANGER
Usage precautions
Hazard statement
  • H226 - Flammable liquid and vapor.
  • H304 - May be fatal if swallowed and enters airways.
Contains
  • Heavy naphtha (petroleum), hydrotreated; hydrotreated low boiling point naphtha
DANGER - Observe usage precautions
UFI:W310-W0NN-U00E-NNMU
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products
Pro tips to guide you