RENOVA 500ML
Acid-based TFR (Traffic Film Remover) shampoo to remove limescale deposits, industrial pollutants and mineral deposits from PPF films and wraps.
- Volume: 500 ml
- Deep cleaning of ingrained dirt.
- Compatible with TPU (PPF) and PVC (wraps/coverings) and all types of paintwork.
from €100 of purchase.
RENOVA from the Italian brand LABOCOSMETICA is an acid-based shampoo designed to decontaminate PPF films and wraps from limescale deposits and other industrial pollutants that clog the film pores.
The observation from film installers was clear: PPF turns yellow, becomes difficult to clean as if the grime is embedded inside, insect marks stain the film, etc.
RENOVA was therefore developed as a direct response to these issues.
The acidity of RENOVA's formula is perfectly controlled and will not alter the surface of the films, their gloss, or cause any long-term dullness.
The lubrication of RENOVA has also been carefully engineered to promote glove glide on delicate finishes.
RENOVA can be used as a regular maintenance shampoo or locally on an area with heavy limescale build-up.
This acid shampoo should be used periodically as a complement to a pH-neutral shampoo (e.g. Semper) in order to regularly detoxify the film from the various pollutants that alter its hydrophobic properties.
Available in 500ml, to be diluted in a bucket of warm water.
** #Labocosmetica - The Best Hand for The Best Cars **
Founded in 2016 by the MA-FRA group, #Labocosmetica is dedicated to the most demanding Detailers. Drawing on the expertise and innovation of MA-FRA, founded in 1965, #Labocosmetica offers a premium range of automotive care products. Every formula is crafted with scientific precision to guarantee impeccable results. With over 50 years of experience, MA-FRA continues to stand out through its commitment to quality and innovation, making #Labocosmetica an essential reference in automotive Detailing.
How do you use RENOVA by Labocosmetica?
Hand wash (dilution 1:50)
- Dilute 20 ml of product in 10 liters of water.
- Apply using a highly lubricating microfiber mitt.
- Work the surface in sections, proceeding from top to bottom.
- Rinse thoroughly.
- Dry with a clean, dry microfiber cloth.
Intensive spot treatment (dilution 1:10)
- Dilute 100 ml of product in 1 liter of water.
- Apply to areas contaminated with mineral residue or limescale.
- Allow to dwell for a maximum of 60 seconds.
- Rinse immediately.
Maintenance shampoo for PPF (dilution 1:200)
- Dilute 5 ml of product in 1 liter of water (50 ml in 10 liters).
- Apply using a mitt or sponge to an already wet surface.
- Work evenly and rinse thoroughly.
Booster on a microfiber mitt (dilution 1:5)
- Dilute 200 ml of product in 1 liter of water.
- Pour the solution directly onto the microfiber mitt.
- Pass the mitt over the surface section by section to restore hydrophobicity and gloss.
Do not allow to dry; rinse immediately after application.
Degreasing spray for wheels or critical areas (dilution 1:5)
- Dilute 200 ml of product in 1 liter of water.
- Apply directly to wheels or contaminated areas using a sprayer.
- Work with a soft-bristle brush.
- Rinse thoroughly.
Check compatibility beforehand on delicate surfaces.
Tip: Never apply to a hot surface or in direct sunlight. Do not allow it to dry on the surface for too long.
ACID-BASED
Very high decontamination power on mineral deposits.
MULTIPLE USES
Several application methods possible.
RESTORES A LIKE-NEW LOOK
Effective for restoring a like-new appearance to PPF.
DILUTABLE
Economical dilution.
Use a pH-neutral shampoo (e.g., Semper) alternately with RENOVA. Never allow it to dry in direct sunlight.
- Storage: Protect from frost and excessive heat. Store between 5°C and 25°C in a dry, ventilated place. Close tightly after use.
- H314 - Causes severe skin burns and eye damage.
- H318 - Causes serious eye damage.
- Quaternary C12-14 alkyl methyl amine ethoxylate methyl chloride
- glycolic acid
- C8-C10 alkyl polyglucoside
- phosphoric acid
Be the first to ask a question about this product!