Sour Shampoo - 1000ml Zvizzer - ZV108SOS
Zvizzer
ZV108SOS

Sour Shampoo - 1000ml

Multi-surface decontaminating shampoo usable with the two-bucket method or with a foam cannon as a pre-wash phase.
1L.

€25.27
You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 2 points loyalty. Your cart total will be 2 points equivalent to a discount voucher of €0.40
Description

Sour Shampoo by the brand ZVIZZER is an excellent shampoo usable on all types of vehicles, whether protected or not. Equipped with very strong cleaning power, it is still suitable for vehicles fitted with a ceramic coating. Road grime film, bird droppings, bug splatter, etc. will now be very easy to clean with Sour Shampoo.

This shampoo, acid-based (pH 3–4), will remove various limescale marks on protected vehicles (spotting), as well as all kinds of mineral fallout.

As a result, your ceramic-protected vehicle will regain the hydrophobic effect lost due to the deposit of these surface contaminants.

The ideal approach is to use a neutral shampoo (pH close to 7, such as the Pure Shampoo from INFINITY WAX) right after cleaning your car with Sour Shampoo, or simply to rinse your vehicle thoroughly with plenty of water.


Learn more about Zvizzer

** Zvizzer - German Innovation at the Service of Automotive Polishing **

ZviZZer is a German brand specializing in automotive polishing, recognized for its expertise and innovation. It offers a complete range of foam, wool, and microfiber pads, as well as next-generation water-based polishes, guaranteeing dust-free and odor-free use. Zvizzer brings disruptive innovation to Detailing: THERMO foams, which do not deform with heat during polishing, allowing you to work your polish much longer without damaging your pad.

To be used with
Instructions for use

How to use the Sour Shampoo by ZVIZZER?

Two-bucket wash method:

  1. Fill your wash bucket with 50ml of Sour Shampoo in a 10L bucket of lukewarm water.
  2. Agitate the solution well by hand or with a little pressure from your pressure washer.
  3. Dip your mitt into the wash water and wash one panel at a time using straight-line movements (not circular!).
  4. Start from the top and work your way down to the lower body line.
  5. Rinse the vehicle thoroughly with clean water.
  6. Ideally, re-wash and rinse the vehicle once more with a gentle pH-neutral shampoo (such as Pure Shampoo by INFINITY WAX).
  7. Finish with a proper drying using a drying microfiber (e.g. B52 by COCKTAIL MICROFIBERS)

Foam cannon use (pre-wash):

  1. Fill your foam lance with 20ml of Sour Shampoo and then fill the 1L reservoir with hot water ideally.
  2. If the vehicle is particularly dirty, rinse it first. Otherwise, spray your Sour Shampoo solution from bottom to top directly onto the dry vehicle (better clinging power).
  3. Allow the solution to dwell for a few minutes (2–3 min maximum) and clean the details while the product is working.
  4. Rinse the vehicle thoroughly with clean water.
  5. Then finish by washing your vehicle by hand following the process described above.

Warning: Always work in the shade and on cool surfaces. Never allow the shampoo to dry on surfaces for too long.

Specifications

ACIDIC PH

The acidic pH removes mineral and limescale haze.

COMPATIBLE WITH CERAMIC COATINGS

Sour Power is compatible with ceramic coatings.

DEGREASING ACTION

Provides thorough deep cleaning of any vehicle, coated or uncoated.

LARGE FORMAT

Its 1L format allows treatment of a vehicle more than 20 times.

Care instructions

Always clean your foam cannon thoroughly with clean water by filling the reservoir with water only and running the pressure washer until the reservoir is empty. Rinse your mitt thoroughly after use by squeezing out all residual foam.

Product sheet
Dilution
To dilute
Chemical Base
Acid-based (Neutralized)
Foaming power
6/10
Cleaning Power
8/10
Anti-scale power
6/10
Water solubility
Yes
Maximum exposure time
2 minutes
Eliminates Inorganic Contaminants
No
Eliminates Organic Contaminants
Yes
Removes ceramic coatings
No
pH Type
Acid
UFI
AG10-S0H8-N00N-2PN1
pH in aqueous solution
3-4
Adds Protection
No
Adds Hydrophobic Properties
No
Recommended Washing Method
Two-bucket technique, foam cannon
Usage precautions
Hazard statement
  • H315 - Causes skin irritation.
  • H318 - Causes serious eye damage.
Contains
  • Alcohols, C12-14, ethoxylated, sulfates, sodium salts. 5 - < 10%
  • Benzenesulfonic acid, 4-C10-13-sec-alkyl derivs. 1 - < 10%
  • 2-(2-butoxyethoxy)ethanol 1 - < 5%
UFI:AG10-S0H8-N00N-2PN1
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products