Labocosmetica
LA003PU
PURIFICA
Decontaminating shampoo to easily remove limescale deposits and acid rain halos, etc.
1L
€25.60
In stock
- shipped within 24h/72h
Pay in 3 installments with
from €100 of purchase.
By purchasing this product you can earn up to 2 points loyalty.
Your cart total will be
2 points equivalent to a discount voucher of €0.40
from €100 of purchase.
Description
The Purifica shampoo offered by LABOCOSMETICA is an acid-based decontamination shampoo designed to easily remove limescale and acid rain marks from your bodywork caused by imperfect drying.
Purifica completely dissolves limescale deposited on the bodywork or acid rain residue. This is often very visible on a vehicle with a dark finish (whitish halos, dull haze) and greatly attacks the hydrophobic effect of your ceramic coatings.
This shampoo will respect your previously applied protections without removing them (ceramic coatings) and will thus contribute to the "renewal" of the treatment by detoxifying the layer from all calcium aggression present.
The use of Purifica can be done using the two-bucket technique or with the help of a foam cannon (foam-lance type). Simply adjust the dilution ratios according to use. Purifica is designed to remain effective even at very high dilutions.
Not to be used as a maintenance shampoo but as a hard shampoo approximately once every 6 months on a ceramic-treated vehicle.
Learn more about Labocosmetica
** #Labocosmetica - The Best Hand for The Best Cars **
Founded in 2016 by the MA-FRA group, #Labocosmetica is dedicated to the most demanding Detailers. Drawing on the expertise and innovation of MA-FRA, founded in 1965, #Labocosmetica offers a premium range of automotive care products. Every formula is crafted with scientific precision to guarantee impeccable results. With over 50 years of experience, MA-FRA continues to stand out through its commitment to quality and innovation, making #Labocosmetica an essential reference in automotive Detailing.
To be used with
Instructions for use
Instructions for use- For the two-bucket method: pour 25 to 90 ml of Purifica into a 10 L bucket, to be used every 3 washes.- In a spray bottle: dilute from 1:10 up to neat, and spray directly onto water spots. Hazard statementsH315 - Causes skin irritation.H318 - Causes serious eye damage.
- Preparation: If necessary, pre-wash your vehicle beforehand using Primus 2.0
- Dosage: Add 25 to 90 ml of Purifica into a 10 L bucket. Alternatively, dilute Purifica between 1:5 and 1:10 in your foam cannon reservoir.
- Application: Work section by section during contact washing, or spray your solution from bottom to top when using a foam cannon for pre-wash.
- Drying: Never allow Purifica to dry on the surface. After wiping a panel with the wash mitt, rinse immediately. Dwell time for Purifica on the surface after spraying during the pre-wash stage is approximately 1 minute.
- Finishing: After rinsing, dry your car thoroughly with a microfiber drying towel.
Features and benefits:
- Decontaminating shampoo: effectively removes oxidation marks and mineral deposits / water spotting on coated or uncoated bodywork.
- Hydrophobic effect: The hydrophobic properties of the original protection will be fully restored.
- Versatility: Suitable for use with a foam cannon or the two-bucket method.
Compatibility:
Suitable for all types of automotive paints, including metallic and clear-coated finishes.
Specifications
DESCALING & ANTI-LIMESCALE
Highly effective against water spots, limescale marks, and dull film.
CERAMIC COATING REJUVENATION
Literally detoxifies the outer layer of the ceramic coating and restores hydrophobicity.
COST-EFFECTIVE DILUTION
Highly dilutable and therefore very economical.
VERSATILE
Can be used both with the two-bucket method or during the pre-wash stage in a foam cannon.
Care instructions
Use only very periodically to maintain your ceramic coatings or if noticeable water spots appear (every 3–6 months).
For your routine maintenance washes, use a dedicated shampoo such as RevitaX.
Caution!
- Do not apply the coating to hot surfaces or in direct sunlight.
- Suitable application temperature range: +10 °C to +25 °C.
- Do not apply if the temperature exceeds +30 °C.
- Ensure all areas of the coating are thoroughly wiped off and buffed after application.
Product sheet
UFI
J7M0-A079-S00H-U6G7
Warning statement
DANGER
Usage precautions
Hazard statement
- Hazard statements
- H318 - Causes serious eye damage.
- H315 - Causes skin irritation.
Contains
Contains:
Contains a quaternary compound. May produce an allergic reaction.
Contains: sulfonic acids, C14-16-alkane hydroxy and C14-16-alkene, sodium salts, Cocamidopropyl Betaine, Ethoxylated Fatty Amine.
FAQ
About how many washes apart should I use Purifica?
We recommend using Purifica every 5 to 6 washes, depending on the operating conditions of the vehicle (even less frequently on a vehicle driven rarely and parked indoors).
Can the product be applied by enthusiasts or is professional application required?
No, Purifica can be used by anyone without restrictions.
Can I use Purifica on my ceramic-coated vehicle without the risk of stripping the protection?
Yes, Purifica can be safely used on a ceramic coating. On the contrary, it helps unclog the outer layer of the coating from all impurities and restores the hydrophobic effect.
Do I need to prepare the car's surface before applying Purifica?
Ideally, a pre-wash with Primus 2.0 can be performed to carry out the initial heavy cleaning.
DANGER - Observe usage precautions
UFI:J7M0-A079-S00H-U6G7
Our customers' reviews of this product
Frequently questions
FAQ
Be the first to ask a question about this product!
Question about the product
You may also like
Recently viewed products
