Express 24h delivery for orders placed before 1pm
- Promotions
- Kits
- Washing
-
Rim & Tire
Rim & Tire - Sale
- New
-
Decontamination
Decontamination - Sale
- New
-
Correction & Polishing
Correction & Polishing - Sale
- New
- Protection
- Interior
-
Windows
Windows - Sale
- New
-
Accessories
Accessories - Sale
- New
- Others
- Professional products
- Brands
- My pro area
- Wishlist
- Blog
911 - HARD PRE-WASH SOLUTION TO DILUTE
Pre-wash solution for removing sticky road grime. To dilute. Pro formulation.
1L - 5L or 20L.
from €100 of purchase.
The Pro 9 range from Fictech consists of 9 essential products for each stage of detailing. These products, intended for professionals, allow for intensive use thanks to their high concentration.
911-Pre-wash Cleaner is a pre-wash solution to easily remove sticky road grime from varnishes and other surfaces (do not bring into contact with bare aluminum or any anodized surface!).
Usable in a foam cannon or in a pre-pressure sprayer, 911-Pre-wash Cleaner will greatly speed up your cleaning by removing mud, bird droppings, insect film, carbon deposits, etc.
911- Pre-wash Cleaner will also deliver a perfect finish after rinsing thanks to its slick (self-drying) effect.
How to use Fictech PRO 911?
- Shake the bottle well before use.
- Solution dosage: 1L of 911 concentrate for 5L of water 5L of 911 concentrate for 25L of water
- Dilution for spray application: The resulting concentrated washing solution can then be diluted directly in a sprayer or using a dosing system (venturi system). Apply a 3 to 8% dilution. Application possible by direct spray or with an active foam system.
- Spray laterally from bottom to top. Leave to act for a few minutes. Rinse with clear pressurized water from top to bottom and finish with a brief low-pressure rinse to achieve glossy surfaces.
IMPORTANT NOTES:
- Do not allow contact with polished or anodized aluminum surfaces. In case of contact, wash immediately and thoroughly with clear water.
- Always carry out a preliminary test with the product in an inconspicuous area to determine concentration and surface compatibility.
- Never use the product in direct sunlight or allow it to dry on a hot surface.
- H290 - May be corrosive to metals.
- H314 - Causes severe skin burns and eye damage.
EC 215-185-5 SODIUM HYDROXIDE
Be the first to ask a question about this product!