Decontamination Kit Maniac-Auto - MA022KD
Maniac-Auto
MA022KD

Decontamination Kit

Complete mechanical decontamination kit for restoring a smooth, contaminant-free clear coat
Contents: 1 Falko Tools Fine Clay Bar (100g) + 1 Valet Pro Clay Rider (500ml) + 2 Ultra Fine Yellow Microfibers 40x40cm
Treats 2 to 3 vehicles. Ready to use.

€25.95

Instead of €29.35

You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 2 points loyalty. Your cart total will be 2 points equivalent to a discount voucher of €0.40
Description

The Maniac-Auto Decontamination Kit brings together everything needed to perform a complete mechanical decontamination of your paintwork, selected by our team for its reliability and real-world effectiveness.

The Falko Tools Fine Clay Bar is a fine-textured decontamination clay, ideal for gently removing contaminants embedded in the clear coat: metal particles, resins, road film. Its softness makes it compatible with sensitive clear coats and regularly maintained vehicles. The 100g bar can decontaminate 2 to 3 vehicles.

The Valet Pro Clay Rider (500ml) is a ready-to-use clay lubricant with a generously slick formulation. It minimizes the risk of clay marring on the surface and wipes off easily. Its pleasant scent is a welcome bonus during detailing sessions. Can be replaced by the Fictech Glide 500ml.

The 2 Cocktail Microfibers Ultra Fine Yellow microfibers (40x40cm, 300gsm, 80% polyester / 20% polyamide) complete the kit for wiping lubricant residues without leaving marks or lint. Washable and reusable, they are suitable for all painted surfaces.

A complete, carefully selected kit: everything you need to decontaminate like a pro, without any guesswork.

Learn more about Maniac-Auto

Maniac-Auto is gradually developing its detailing brand to offer you flagship products such as the DAS-6 PRO and the Foam Lance. Launch of the 1st product: The Shampoo, Maniac-Auto. 

This pack contains
Falko Tools

Clay Bar Fine

Clay Bar Fine - Mechanical Decontamination Clay Bar - 100g

€10.95
You must be logged in
To be used with
Instructions for use

How to use the Maniac-Auto Decontamination Kit?
1. Thoroughly wash the vehicle and let it dry.
2. Cut off a piece of Falko Tools Fine Clay Bar that fits comfortably in your hand.
3. Generously spray Valet Pro Clay Rider onto an area of approximately 50x50 cm.
4. Glide the clay using gentle, straight-line motions without excessive pressure. You will feel the contaminants gradually disappear.
5. Wipe away lubricant residue with a clean Ultra Fine Yellow Microfiber towel.
6. Knead the clay regularly to expose a clean surface, and repeat the process over the entire vehicle.
7. Store the Fine Clay Bar in its original, hermetically sealed packaging to prevent it from drying out.
Tip: Always work in the shade on a cool surface to prevent the lubricant from drying too quickly.
Tip: Wash the microfibers before first use and after each session, without fabric softener, at a maximum of 30°C.

Specifications

COMPLETE READY-TO-USE KIT
Clay bar, lubricant, and microfibers combined in a single pack for uncompromising decontamination.

2 TO 3 VEHICLES
The 100g Fine Clay Bar and 500ml Clay Rider are enough to fully decontaminate 2 to 3 vehicles.

SAFE ON CLEAR COAT
The fine texture of the clay and the slick formula of Clay Rider minimize any risk of clay marring on the clear coat.

SELECTED PRODUCTS
Falko Tools, Valet Pro, and Cocktail Microfibers: three trusted brands selected by the Maniac-Auto team.

Product sheet
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products
Pro tips to guide you