C-Rock Permanent Ceramic Coating Scholl Concepts - SCH016CR
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
C-Rock Permanent Ceramic Coating
Scholl Concepts
SCH016CR

C-Rock Permanent Ceramic Coating

The renowned ceramic coating offered by Scholl Concepts, in a complete kit.

€115.95
Out of stock
Pay in 3 installments withfrom €100 of purchase.
Description

With C-Rock Permanent Ceramic Coating, you choose extreme, uncompromising protection with unrivalled shine.

The kit offered by Scholl Concepts is complete and includes an ergonomic applicator block for a good grip, 5 application suede cloths that perfectly follow the shape of the block. You will find the C-Rock vial in 30ml format, allowing treatment of 2 to 3 medium-sized vehicles.

C-Rock provides chemical protection for up to approximately 50,000 km, thus considerably easing your maintenance whether by hand or at a car wash.

With a surface hardness of 9H, C-Rock also delivers very high surface beading, preventing various contaminants from sticking to the paint. Re-soiling will therefore occur much more slowly than on an untreated vehicle.

The application of C-Rock follows the same process as any traditional ceramic treatment. Be sure to observe the mandatory 24-hour dry time afterwards.
The first wash must then take place a minimum of 7 days after application.





Learn more about Scholl Concepts

Scholl Concepts is a German manufacturer of detailing products, particularly well known for their polishes.

Instructions for use
1) Thoroughly prepare your surface (decontamination and polishing required). 2) Degrease the surface using an IPA / panel wipe solution. 3) Wrap a suede applicator cloth around the applicator block. Secure all 4 corners properly. 4) Shake the bottle well for 1 min before use. 5) Dispense 10 drops of product in a cross pattern across the center. 6) Apply to a 60x60 cm section using straight, cross-hatch passes with no pressure. 7) Wait 3 to 5 min (5 to 6 min at temperatures <15°C). 8) Buff off using two or three dual-sided microfiber towels for a flawless finish. 9) Wait 24h before exposing the vehicle to water (the first 9 hours are critical).
Product sheet
Our customers' reviews of this product
Frequently questions
FAQ

Be the first to ask a question about this product!

Question about the product

* Required fields
(read)
You may also like
Recently viewed products