Alchimy7
AL141FLO+-1
Flocon EVO+
Ultra-gentle and protective cleaner, designed for pre-washing and washing protected vehicles. It aids in drying and reinforces the existing protection.
- Capacities: 470ml / 1L / 5L.
- Hydrophobic effect.
- Ultra foaming.
€13.50
In stock
- shipped within 24h/72h
Pay in 3 installments with
from €100 of purchase.
By purchasing this product you can earn up to 6 points loyalty.
Your cart total will be
6 points equivalent to a discount voucher of €1.20
from €100 of purchase.
Description
Alchimy7's Flocon EVO+ is an ultra-gentle, highly concentrated cleaner designed for pre-washing and washing vehicles protected by a wax or ceramic coating. In addition to cleaning effectively, it provides a temporary "sacrificial" protection that preserves and reinforces the existing protection between maintenance washes. Its hydrophobic effect also aids in drying the vehicle. Thanks to its "Snow Effect" foam, Flocon EVO+ ensures maximum lubrication, thereby reducing the risk of micro-scratches. Alchimy7 Flocon EVO+ is 100% wax safe and can be used for both pre-washing and washing. With a dilution ranging from 0.1% to 4%, it is economical and effective. Flocon EVO+ is ideal for demanding detailing enthusiasts looking to keep their protected vehicle in impeccable condition. Alchimy7 recommends using EM7 on untreated vehicles.
The product retains all the usage benefits of FLOCON and adds integrated protection so that your wash also helps to protect your car.
Flocon EVO+ delivers an enhanced slick effect (less water at drying) for improved drying.
Flocon EVO+ has been designed for use with a foam cannon or electric sprayer! It will be a valuable asset for all detailing enthusiasts who maintain their car at a pressure wash station or for professionals who carry out daily maintenance washes on treated vehicles.
Learn more about Alchimy7
** Alchimy7 - Official Brilliance Supplier - The French Excellence of Detailing **
Founded by Arnaud Prayer, Alchimy7 is a pioneering French brand in the field of automotive detailing. Created in 2009, Alchimy7 was born from one man's passion for car care and his relentless pursuit of perfection. Faced with a lack of quality products on the French market, he decided to develop his own range based on extremely rigorous specifications. Today, Alchimy7 offers a wide range of products, from cleaners to high-quality microfibers, as well as surface protections, to meet the needs of both demanding enthusiasts and professionals. Every product is developed, tested and manufactured in France, ensuring exceptional performance and quality.
To be used with
Instructions for use
How to use Alchimy7 Flocon EVO+?
- Dilution: Dilute between 0.1% and 4% depending on the accessory used (foam cannon, bucket, foamer).
- Preparation: Pour the diluted solution into the foam cannon or sprayer.
- Pre-wash: Spray the product over the entire vehicle, starting from the roof.
- Rinsing: Rinse thoroughly to remove foam and contaminants.
- Washing: Reapply for the contact wash using the 2-bucket method, a foam cannon, or an electric or manual foamer.
- Cleaning: Use a wash mitt to clean each panel, then rinse (work panel by panel).
- Drying: Dry the vehicle thoroughly with a microfiber towel for a flawless finish.
Warning: Do not allow to dry in direct sunlight.
Dilutions:
- Can be used with a pre-compression sprayer or electric sprayer. Dilution from 15 to 40ml in 1L.
- Generation 1 electric sprayer = between 50 and 70 ml
- Generation 2 electric sprayer = between 20 and 50 ml (Recommended = 40ml)
- Manual pump sprayer = between 25 and 70 ml (depending on the brand).
- Can be used in a foam lance with a dilution of 40 to 100ml.
- 100ml max, if you wish to perform both pre-wash and wash. The rest with water, ideally warm.
- Can be used with the 2-bucket method: (dilution between 0.5 and 2%)
- Or simply between 50 ml and 100 ml in 1 bucket with 10 L of water
Specifications
GENTLE CLEANING
Flocon EVO+ cleans gently without being aggressive, preserving waxes and ceramic coatings.
HYDROPHOBIC EFFECT
Makes drying easier while providing temporary protection.
RICH AND DENSE FOAM
Lubricates perfectly to minimize the risk of scratches.
COST-EFFECTIVE DILUTION
With a dilution ratio of up to 1:1000, Flocon EVO+ offers great value for money.
Care instructions
After each use, rinse your accessories thoroughly (mitts, buckets, foam cannons) to prevent product build-up and keep them in good condition.
Store away from direct sunlight and at a temperature between 10°C and 30°C.
Product sheet
Physical state
Liquid
Odor / Fragrance
"Bubble Gum"
Protection Level
6/10
Durability level
4/10
Beading
Medium
pH Type
Neutral
pH Value
6.5
UFI
JRRY-70RJ-800D-NHFM
Durability
Between two maintenance washes
Density
0.98 kg/l
Warning statement
DANGER
Adds Protection
Yes
Usage precautions
Hazard statement
- H318 - Causes serious eye damage.
- H315 - Causes skin irritation.
- H400 - Very toxic to aquatic life.
- H411 - Toxic to aquatic life with long lasting effects.
Contains
- EUH208 Contains: Methylchloroisothiazolinone. May produce an allergic reaction.
- Cetrimonium chloride
- Amides, C8-18 and C18-unsatd., N,N-bis(hydroxyethyl)
DANGER - Observe usage precautions
UFI:JRRY-70RJ-800D-NHFM
Our customers' reviews of this product
Frequently questions
FAQ
Peut-on utiliser Flocon EVO+ en pratiquant la technique des 2 seaux ?
Flocon EVO+ d'Alchimy7 apporte-t-il une protection supplémentaire entre les lavages ?
Peut-on utiliser Flocon EVO+ uniquement pour le prélavage ?
Quelle est la dilution recommandée pour le Flocon EVO+ avec un canon à mousse ?
Le Flocon EVO+ est-il sûr pour les cires et les protections céramiques ?
Question about the product
You may also like
Recently viewed products