DAS-6 PRO mk2 Dual Action Polisher Maniac-Auto - MA033DA
Maniac Auto orbital polisher
DAS-6 PRO mk2 Dual Action Polisher
Speed selector for the DAS-6 Pro polisher rotation
Handle with grip DAS-6 PRO mk2 Dual Action Polisher
DAS-6 PRO mk2 Dual Action Polisher orbital polisher backing plate
Pad cleaning brush
Pad brush for DAS-6 PRO mk2 Dual Action Polisher
Allen key for DAS-6 PRO mk2 Dual Action Polisher
Bag with DAS-6 PRO mk2 Dual Action Polisher orbital polisher
Maniac Auto orbital polisher
DAS-6 PRO mk2 Dual Action Polisher
Speed selector for the DAS-6 Pro polisher rotation
Handle with grip DAS-6 PRO mk2 Dual Action Polisher
DAS-6 PRO mk2 Dual Action Polisher orbital polisher backing plate
Pad cleaning brush
Pad brush for DAS-6 PRO mk2 Dual Action Polisher
Allen key for DAS-6 PRO mk2 Dual Action Polisher
Maniac-Auto
MA033DA

DAS-6 PRO mk2 Dual Action Polisher

The DAS-6 PRO MK2 is a versatile and powerful orbital polisher, designed to correct defects on your vehicle's clearcoat.

€159.95
You must be logged in
In stock - shipped within 24h/72h
Pay in 3 installments withfrom €100 of purchase.
By purchasing this product you can earn up to 15 points loyalty. Your cart total will be 15 points equivalent to a discount voucher of €3.00
Description

You all know and appreciate the DAS-6 Pro polisher. You will love the DAS-6 Pro mk2 (type X8).

This direct evolution of the DAS-6 Pro retains exactly the same operating mode (orbital) and the same technical specifications. Thus, the DAS-6 PRO mk2 is still equipped with the powerful 900W motor, which gives it a very good ability to withstand pressure in order to correct deep defects.
Also, the 8mm orbit already present on the DAS-6 Pro is retained.

You can easily polish all types of clearcoat with the DAS-6 Pro mk2, including the hardest ones, with a reworked ergonomics. The overall shape of the DAS-6 Pro mk2 has been redesigned to allow better weight distribution, a better grip and above all a speed adjustment within easy reach.
The start trigger is lockable, so you won't have to press it continuously.

The grip at the head allows a perfect hold to distribute pressure optimally during your correction work.

It is still possible with this DAS-6 Pro mk2 to replace the original 5' backing plate with another optional plate (6' or 3') depending on the elements you need to polish.

Backing plates compatible with this machine here: DA ORBITAL BACKING PLATE 3' or DA ORBITAL BACKING PLATE 6'

This DAS-6 Pro mk2 polisher comes in its Maniac-Auto branded carry bag, with an accessory kit (replacement carbon brushes, U-handle, flat backing plate wrench). Also included is a pad cleaning brush, ergonomic and fitted with a wrench at the end of the handle for mounting the included handle.

A polisher with an excellent value for money, ideal for getting started with machine polishing safely and at any skill level, with a reworked ergonomics.

Comes with:

  • Carry bag
  • 125mm backing plate
  • Pad cleaning brush with integrated wrench for handle mounting.
  • Flat wrench for backing plate change
  • U-handle.
  • Extra set of carbon brushes

Polishing pads not included.

You will therefore need to order pads in size 5" (125mm) or 5.5" (130mm) to use them with the included backing plate.

Learn more about Maniac-Auto

Maniac-Auto is gradually developing its detailing brand to offer you flagship products such as the DAS-6 PRO and the Foam Lance. Launch of the 1st product: The Shampoo, Maniac-Auto. 

To be used with
Instructions for use

How to use the DAS-6 PRO MK2?

  1. Attach a suitable pad to the supplied backing plate (5.5" recommended).
  2. Apply a small amount of polish to the pad.
  3. Spread the polish over a small area.
  4. Adjust the speed according to the correction required (1=2500 rpm, 2=3200 rpm, 3=3900 rpm, 4=4900 rpm, 5=5500 rpm, 6=6800 rpm)
  5. Switch on the machine and begin polishing.
  6. Work in overlapping cross passes with light pressure.
  7. Wipe away residue with a clean microfiber and isopropyl alcohol.
  8. Repeat on the remaining areas until the desired result is achieved.

Tip: For optimal polishing, start at a low speed (1–2) to spread the product, then gradually increase the speed to correct defects.

Important: before polishing your vehicle, we recommend pre-washing, washing, then performing mechanical decontamination using a clay bar.

Specifications

RELIABLE POWER

A 900W motor to correct even the deepest defects, even under pressure.

IMPROVED ERGONOMICS

Comfortable grip and intuitive speed adjustment for an optimal user experience.

UNIVERSAL COMPATIBILITY

Compatible with various backing plates and pads to suit all surfaces.

COMPLETE ACCESSORIES

Comes with practical accessories and a carry bag for simplified use.

Care instructions

Clean the pad after each use to prevent polish residue build-up.

Regularly check the condition of the carbon brushes and replace them if necessary.

Store the polisher in its bag to protect it from impacts and dust.

Product sheet
Color
Black
Gross weight
2.745 kg
Power [W]
900
Electric cable [m - ft]
4 meters
Speed controller
1 - 6
OPM
2500 - 6800 oscillations/minute
Orbital throw
8mm
Thread type
5/16
Our customers' reviews of this product
FAQ
I’d like to know whether the backing plate on the DAS-6 PRO mk2 Dual Action Polisher is removable.
Can sanding discs be fitted to the DAS-6 PRO mk2 Dual Action Polisher to sand body filler before applying primer?
Is the DAS-6 PRO MK2 suitable for polishing beginners?
Can the DAS-6 Pro MK2 be used on all types of clear coat?
You may also like
Recently viewed products